2 n'ígwé Omenala PI Stiffeners PCBs bọọdụ sekit na-agbanwe agbanwe
Ozi ndabere
| Nlereanya Mba. | PCB-A42 |
| Ngwungwu njem | Mbukota Vacuum |
| Asambodo | UL, ISO9001&ISO14001, RoHS |
| Ngwa | Eletrọnịkị ndị ahịa |
| Oghere/ Ahịrị kacha nta | 0.075mm / 3mil |
| Ike mmepụta | 720,000 M2/Afọ |
| Koodu HS | 853400900 |
| Mmalite | Emebere na china |
Nkọwa ngwaahịa
Nlebanya bọọdụ sekit e biri ebi na-agbanwe agbanwe
Nkọwa
PCB na-agbanwe agbanwe - okirikiri ebipụtara na-agbanwe agbanwe, nke akpọrọ FPC.
Enwere ike ịkọwa sekit a na-ebipụta na-agbanwe agbanwe dị ka nkọwapụta nke ihe omume jikọtara na mkpụrụ na-agbanwe agbanwe.A na-eme ya ka ọ bụrụ usoro sekit ndị na-eduzi site na iji ụkpụrụ ìhè kpughee nnyefe na etching usoro n'elu ihe na-agbanwe agbanwe.
Njirimara
A na-eji sekit Flex eme ihe na ekwentị mkpanaaka, igwefoto na smarteyi akwa.
Ọ nwere ike mma dabara wiring ike na oghere karịa omenala isiike mbadamba.Mgbanwe sekit mbadamba nwekwara mma iguzogide elu okpomọkụ, ujo na vibrations.ọ nwere arụmọrụ dị mma na ihe ịma aka imewe dị ka: crossovers na-apụghị izere ezere, ihe mgbochi chọrọ kpọmkwem, mkpochapụ okwu mkparịta ụka, ihe nchebe ọzọ na njupụta akụkụ dị elu.
Hazie
PCB Flex nwere akụkụ otu
Mgbanwe nwere otu akụkụ nwere okpukpu abụọohere
PCB Flex nwere akụkụ abụọ
Multi-layer Flex PCB
Nka na ụzụ & Ike
| Ihe | Speci. |
| N'ígwé | 1 ~ 8 |
| Ọkpụrụkpụ osisi | 0.1mm-0.2mm |
| Ihe eji eme ihe | PI (0.5mil, 1mil,2mil), PET (0.5mil, 1mil) |
| Ọkara Nrụpụta | Ọla kọpa (1/3oz, 1/2oz, 1oz,2oz) Constantan Tapawa ọla ọcha Ink ọla kọpa |
| Oke panel nke kachasị | 600mm × 1200mm |
| Nha oghere min | 0.1mm |
| Ogologo Ahịrị Obere/Oghere | 3mil (0.075mm) |
| Nha mbunye kacha (otu panel na okpukpu abụọ) | 610mm*1200mm (oke ngosi) 250mm * 35mm (naanị ịzụlite ule samples) |
| Oke ntinye oke (otu panel & okpukpu abụọ enweghị PTH ink na-ehicha onwe ya + ọkụ UV siri ike) | 610*1650mm |
| Oghere mkpọpu (Mechanical) | 17um--175um |
| Ngwucha oghere (Mechanical) | 0.10mm--6.30mm |
| Nlegide Dayameta (Mechanical) | 0.05mm |
| Ndebanye aha (Mechanical) | 0.075 mm |
| Akụkụ akụkụ | 2: 1 (Opekempe 0.1mm) 5: 1 (Opekempe 0.2mm) 8: 1 (Opekempe 0.3mm) |
| SMT Obere.Obosara ihe mkpuchi ihe nkpuchi | 0.075 mm |
| ObereMkpuchi ihe mkpuchi ihe na-ere ihe | 0.05mm |
| Nnagide Mgbochi Mgbochi | 10% |
| Ngwucha elu | ENIG, HASL, Chem.Tin/Sn |
| Ihe mkpuchi solder/ihe nkiri nchekwa | PI (0.5mil, 1mil,2mil) (Yellow, White, Black) PET (1mil, 2mil) Ihe mkpuchi solder (acha ndụ ndụ, odo, ojii ...) |
| Ihuenyo silk | Uhie/Edo/oji/Ọcha |
| Asambodo | UL, ISO 9001, ISO14001, IATF16949 |
| Arịrịọ pụrụ iche | Gluo(3M467,3M468,3M9077,TESA8853...) |
| Ndị na-eweta ihe | Shengyi, ITEQ, Taiyo, wdg. |
| Ngwungwu nkịtị | Vacuum+Katọn |
| Ikike mmepụta kwa ọnwa/m² | 60,000 m² |
Oge ndu PCB na-agbanwe agbanwe
| Obere ogbeOlu ≤1 square mita | Ụbọchị ọrụ | Mmepụta Mass | Ụbọchị ọrụ |
| Otu akụkụ | 3-4 | Otu akụkụ | 8-10 |
| 2-4 n'ígwé | 4-5 | 2-4 n'ígwé | 10-12 |
| 6-8 n'ígwé | 10-12 | 6-8 n'ígwé | 14-18 |
Kedu ka ABIS si eme ihe na PCB na-agbanwe agbanwe?
Ihe mbụ anyị na-ahụ bụ ngwá ọrụ kwesịrị ekwesị iji mepụta bọọdụ gị.Na-esote, ndị ọrụ nwere ahụmahụ zuru oke iji dozie ihe ịma aka nke ịmepụta bọọdụ na-agbanwe agbanwe.
Imepe ihe mkpuchi na-ere ihe ma ọ bụ kpuchiri usoro dị iche iche nke usoro a nwere ike ịgbanwe ka bọọdụ na-agbanwe agbanwe si dị.Etching na plating nwere ike gbanwee ọdịdị nke PCB, nke mere ị ga-eji hụ na oghere machie bụ obosara kwesịrị ekwesị.
Họrọ ihe ndị ahụ nke ọma, na-atụlekwa ihe ndị ọzọ, dị ka nha, ibu, na ntụkwasị obi nke osisi.
Jikwaa nso nso kwesịrị ekwesị nke nkwonkwo na-egweri na ebe a na-ehulata - nkwonkwo ihe na-ere ahịa kwesịrị ịdị n'ebe dị anya achọrọ site na ebe a na-ehulata.Ọ bụrụ na ị na-etinye ha nso nke ukwuu, delamination ma ọ bụ akwa akwa akwa akwa akwa nwere ike ime.
Oghere ihe na-ere ihe njikwa - ABIS na-ahụ na enwere ohere zuru oke n'etiti pads na ihe ndị na-eduzi n'akụkụ ha, nke mere na ịzere mfu lamination.
Ọrụ ịdịmma ABIS
Ọnụego ngafe nke ihe na-abata n'elu 99.9%, ọnụ ọgụgụ nke nnabata ọnụ ọgụgụ dị n'okpuru 0.01%.
Ụlọ ọrụ ABIS kwadoro na-achịkwa usoro niile dị mkpa iji kpochapụ nsogbu niile nwere ike tupu ha emepụta.
ABIS na-eji sọftụwia dị elu rụọ nnukwu nyocha DFM na data na-abata, ma na-eji sistemụ njikwa ogo dị elu n'oge usoro nrụpụta.
ABIS na-eme nyocha 100% visual na AOI yana ime nnwale eletriki, nnwale voltaji dị elu, nnwale njikwa impedance, micro-sectioning, thermal shock test, solder test, trust test, insulating insulating test and ionic cleanness test.
Asambodo
FAQ
Onye ahịa ọ bụla ga-enwe ire ere iji kpọtụrụ gị.Oge ọrụ anyị: ụtụtụ 9:00-PM 19:00 (Oge Beijing) site na Mọnde ruo Fraịde.Anyị ga-aza email gị ngwa ngwa n'oge ọrụ anyị.Ị nwekwara ike ịkpọtụrụ ahịa anyị site na ekwentị ma ọ bụrụ na ọ dị ngwa ngwa.
Usoro anyị na-emesi ike dị ka n'okpuru:
a), Nlele anya
b), nyocha na-efe efe, ngwa nrụnye
c), njikwa mgbochi
d), Nchọpụta ike onye na-ere ere
e), Mikroskopu dijitalụ metallogram
f), AOI (Nleba anya na-akpaghị aka)
N'ozuzu, 2-3 ụbọchị maka ime sample.Oge ndu nke mmepụta oke ga-adabere n'ọtụtụ usoro na oge ị na-etinye iwu.
Usoro anyị na-emesi ike dị ka n'okpuru:
a), Nlele anya
b), nyocha na-efe efe, ngwa nrụnye
c), njikwa mgbochi
d), Nchọpụta ike onye na-ere ere
e), Mikroskopu dijitalụ metallogram
f), AOI (Nleba anya na-akpaghị aka)
ABIS enweghị MOQ chọrọ maka PCB ma ọ bụ PCBA.
ABlS na-eme nyocha 100% visual na AOl yana ime ule eletriki, nnwale voltaji dị elu,njikwa impedanceule, micro-sectioning, thermal ujo ule, solder test, ntụkwasị obi ule, mkpuchi mkpuchi ule, ule ịdị ọcha ionna PCBA arụ ọrụ ule.
Biko zitere anyị ajụjụ nkọwa nkọwa, dị ka Nọmba ihe, Ọnụọgụ maka ihe ọ bụla, arịrịọ dị mma, Logo, Usoro ịkwụ ụgwọ, usoro njem, ebe mgbapu, wdg. Anyị ga-emere gị nkọwa ziri ezi ozugbo enwere ike.
Ọnụego nnyefe n'oge karịrị 95%
a), ntụgharị ọsọ ọsọ awa 24 maka PCB akụkụ abụọ
b), 48hours maka 4-8 oyi akwa prototype PCB
c), 1 awa maka nhota
d), awa 2 maka ajụjụ injinia/nzaghachi mkpesa
e), 7-24 awa maka nkwado teknụzụ / ịtụ ọrụ / nrụpụta ọrụ
| Ike mmepụta nke ngwaahịa ire ere ọkụ | |
| Ụlọ ọrụ PCB akụkụ/Multlayer ugboro abụọ | Ụlọ ọrụ aluminom PCB |
| Ike nka nka | Ike nka nka |
| Akụrụngwa: CEM-1, CEM-3, FR-4 (High TG), Rogers, TELFON | Raw ihe: Aluminom base, ọla kọpa |
| oyi akwa: 1 oyi akwa ruo 20 oyi akwa | oyi akwa: 1 oyi akwa na 2 Layer |
| Obosara Obere ahịrị/Oghere: 3mil/3mil (0.075mm/0.075mm) | Obosara / oghere: 4mil/4mil (0.1mm/0.1mm) |
| Nha oghere Min.: 0.1mm (oghere dirilling) | Min.Oghere oghere: 12mil (0.3mm) |
| Oke.Oke osisi: 1200mm* 600mm | Oke osisi: 1200mm* 560mm(47in* 22in) |
| Ọkpụrụkpụ osisi emechara: 0.2mm- 6.0mm | Ọkpụkpụ osisi emechara: 0.3 ~ 5mm |
| Ọkpụrụkpụ ọla kọpa: 18um ~ 280um (0.5oz ~ 8oz) | Ọkpụrụkpụ ọla kọpa: 35um ~ 210um (1oz ~ 6oz) |
| Nkwadebe NPTH: +/- 0.075mm, PTH oghere ndidi: +/- 0.05mm | Ntachi obi oghere: +/- 0.05mm |
| Nlegide ihe ngosi: +/- 0.13mm | Nlegide ihe nlegharị anya: +/ 0.15mm;nnabata akara ntụmadị:+/ 0.1mm |
| Emechara elu elu: HASL na-enweghị ndu, ọla edo imikpu (ENIG), ọla ọcha imikpu, OSP, plating gold, mkpịsị aka ọla edo, Carbon INK. | Emechara elu elu: HASL n'efu, ọla edo imikpu (ENIG), ọlaọcha imikpu, OSP wdg |
| Nkwekọrịta njikwa mgbochi: +/- 10% | Nlegide ọkpụrụkpụ nke fọdụrụ: +/- 0.1mm |
| Ike mmepụta: 50,000 sqm / ọnwa | MC PCB mmepụta ike: 10,000 sqm / ọnwa |
