4oz Multilayer FR4 PCB Board na ENIG ejiri ya na ụlọ ọrụ ike yana IPC Class 3
Ozi nrụpụta
| Nlereanya Mba. | PCB-A9 |
| Ngwungwu njem | Mbukota Vacuum |
| Asambodo | UL, ISO9001&ISO14001, RoHS |
| Ngwa | Eletrọnịkị ndị ahịa |
| Oghere/ Ahịrị kacha nta | 0.075mm / 3mil |
| Ike mmepụta | 50,000 sqm / ọnwa |
| Koodu HS | 853400900 |
| Mmalite | Emebere na china |
Nkọwa ngwaahịa
FR4 PCB Okwu Mmalite
Nkọwa
FR pụtara "ọkụ na-ere ọkụ," FR-4 (ma ọ bụ FR4) bụ ọkwa ọkwa NEMA maka ihe eji eme epoxy laminate na-eme ka iko sie ike, ihe ngwakọta nke nwere akwa fiberglass kpara nke nwere eriri resin epoxy nke na-eme ka ọ bụrụ ihe dị mma maka ihe eletrik. na bọọdụ sekit e biri ebi.
Uru na ọghọm nke FR4 PCB
Ihe FR-4 na-ewu ewu nke ukwuu n'ihi ọtụtụ àgwà ya dị ebube nke nwere ike ịba uru na bọọdụ sekit e biri ebi.Na mgbakwunye na ịbụ ọnụ ala ma dị mfe iji rụọ ọrụ, ọ bụ ihe mkpuchi eletrik nwere ike dielectric dị elu.Na mgbakwunye, ọ na-adịgide adịgide, mmiri na-eguzogide mmiri, ọ na-eguzogide okpomọkụ yana ịdị arọ.
FR-4 bụ ihe dị mkpa n'ọtụtụ ebe, na-ewu ewu nke ukwuu maka ọnụ ala ya dị ala yana nkwụsi ike igwe na eletriki.Ọ bụ ezie na ihe a nwere uru bara ụba ma dị n'ụdị nha na nha dị iche iche, ọ bụghị nhọrọ kacha mma maka ngwa ọ bụla, ọkachasị ngwa ugboro ugboro dị ka RF na ngwa ngwa ngwa.
Ọdịdị PCB ọtụtụ oyi akwa
Multilayer PCBs na-abawanye mgbagwoju anya na njupụta nke atụmatụ PCB site n'ịgbakwunye ọkwa ndị ọzọ gafere elu na ala ala a na-ahụ na mbadamba akụkụ abụọ.A na-ewu PCB multilayer site n'ịkwado akwa dị iche iche.A na-achịkọta akwa dị n'ime, nke na-ejikarị bọọdụ sekit nwere akụkụ abụọ, yana akwa mkpuchi n'etiti na n'etiti foil ọla kọpa maka elu elu.Oghere ndị a gbapụrụ site na osisi (vias) ga-eme ka njikọ dị iche iche dị iche iche nke osisi ahụ.
Nka na ụzụ & Ike
| Ihe | Ike mmepụta |
| Ngụkọta oyi akwa | 1-20 n'ígwé |
| Ihe onwunwe | FR-4, CEM-1 / CEM-3, PI, High Tg, Rogers, PTEF, Alu / Cu Base, wdg |
| Ọkpụrụkpụ osisi | 0.10mm-8.00mm |
| Oke kacha | 600mmX1200mm |
| Nkwenye nkọwapụta bọọdụ | + 0.10 mm |
| Nkwadebe ịdị arọ (t≥0.8mm) | ± 8% |
| Nkwagide Ọkpụrụkpụ (t<0.8mm) | ± 10% |
| Mkpuchi oyi akwa | 0.075mm--5.00mm |
| Ahịrị kacha nta | 0.075 mm |
| Oghere kacha nta | 0.075 mm |
| Ọbara ọla kọpa na-apụ apụ | 18um--350um |
| Ọbara ọla kọpa dị n'ime Layer | 17um--175um |
| Oghere ogbunigwe (Mechanical) | 0.15mm--6.35mm |
| Ngwucha oghere(Mechanical) | 0.10mm-6.30mm |
| Nkwekọrịta dayameta (Mechanical) | 0.05mm |
| Ndebanye aha(Mechanical) | 0.075 mm |
| Akụkụ akụkụ | 16:1 |
| Ụdị nkpuchi solder | LPI |
| Obosara nkpuchi SMT Mini.Solder | 0.075 mm |
| ObereMkpuchi ihe mkpuchi ihe na-ere ihe | 0.05mm |
| Nkwụnye dayameta | 0.25mm - 0.60mm |
| Ntachi obi njikwa mgbochi | ± 10% |
| Ngwucha / ọgwụgwọ elu | HASL, ENIG, Chem, Tin, Flash Gold, OSP, Gold Finger |
Oge ndu Q/T
| Otu | Oge ndu kacha ọsọ | Oge ndu oge |
| Akụkụ abụọ | elekere 24 | elekere 120 |
| 4 N'ígwé | elekere 48 | elekere 172 |
| 6 N'ígwé | elekere 72 | elekere 192 |
| 8 akwa akwa | elekere 96 | elekere 212 |
| 10 n'ígwé | elekere 120 | elekere 268 |
| 12 n'ígwé | elekere 120 | 280h |
| 14 N'ígwé | elekere 144 | 292h |
| 16-20 n'ígwé | Dabere na ihe achọrọ | |
| N'elu 20 Layer | Dabere na ihe achọrọ | |
Ntugharị ABIS jikwaa FR4 PCBS
Nkwadebe oghere
Wepụ ihe mkpofu nke ọma & na-edozi paramita igwe ihe: tupu etinye ya na ọla kọpa, ABIS na-elebara oghere niile dị na PCB FR4 anya iji wepụ irighiri ihe, mmebi nke elu na epoxy smear, oghere ndị dị ọcha na-ahụ na platin na-agbaso mgbidi oghere ahụ nke ọma. .Ọzọkwa, n'oge usoro a, a na-edozi parampat igwe na-egwupụta ihe nke ọma.
Nkwadebe elu
Deburing nke ọma: ndị ọrụ teknụzụ anyị nwere ahụmahụ ga-amata tupu oge eruo na naanị otu ụzọ isi zere nsonaazụ ọjọọ bụ ịtụ anya mkpa ọ dị maka njikwa pụrụ iche na ime usoro kwesịrị ekwesị iji jide n'aka na ejiri nlezianya mee usoro ahụ nke ọma.
Ọnụego Mgbasawanye okpomọkụ
N'ịmekọrịta ihe dị iche iche, ABIS ga-enwe ike nyochaa nchikota iji jide n'aka na ọ dị mma.wee debe ntụkwasị obi ogologo oge nke CTE (ọnụọgụ nke mgbasawanye thermal), na CTE dị ala, ọ ga-abụrịrị na nke a na-etinye n'ime oghere ga-adaba site na mgbanwe nke ọla kọpa ugboro ugboro nke na-etolite njikọ njikọta nke oyi akwa.
Ịtụle
ABIS na-achịkwa sekit a na-ebuli elu site na pasentị ama ama na atụmanya nke ọnwụ a ka ọkwa ndị ahụ ga-alaghachi n'ụdị ha haziri ka emechara okirikiri lamination.Ọzọkwa, na-eji laminate emeputa ndabere scaling ntụnye na nchikota na n'ime-ụlọ statistical usoro njikwa data, na-ịkpọ-n'ọnụ ọgụgụ ihe ga-agbanwe agbanwe ka oge na-aga n'ime otu ebe mmepụta ihe.
Ịrụ igwe
Mgbe oge ruru iji wuo PCB gị, ABIS jide n'aka na ịhọrọ nwere akụrụngwa na ahụmịhe iji mepụta ya nke ọma na nnwale mbụ.
Ihe ngosi ngwaahịa & akụrụngwa PCB
PCB siri ike, PCB na-agbanwe agbanwe, PCB siri ike-Flex, HDI PCB, PCB Assembly
Ọrụ ịdịmma ABIS
Ndepụta akụrụngwa dị elu
| Nnwale AOI | Na-enyocha maka pasteChecks solder maka akụrụngwa gbadara ruo 0201 Nyochaa ihe ndị na-efu efu, nkwụsị, akụkụ na-ezighi ezi, polarity |
| Nyocha X-ray | X-Ray na-enye nleba anya dị elu nke: BGAs/Micro BGAs/Chip scale packages/Bareboards |
| Nnwale n'ime okirikiri | A na-ejikarị Nnwale In-Circuit eme ihe yana njikọ AOI na-ebelata ntụpọ arụ ọrụ nke nsogbu akụrụngwa kpatara. |
| Nnwale mgbake | Mmemme Ngwaọrụ TestFlash arụrụ dị elu Nnwale arụ ọrụ |
Nyocha mbata IOC
Nyocha SPI solder mado
Nyocha AOI n'ịntanetị
Nyocha akụkọ mbụ SMT
Ntụle mpụga
Nyocha ịgbado ọkụ X-RAY
Ngwaọrụ BGA rụgharịa ọrụ
Nyocha QA
Ụlọ nkwakọba ihe mgbochi static na mbupu
Pukpata mkpesa 0% na ịdịmma
Ngalaba niile na-arụ ọrụ dị ka ISO si kwuo, ụlọ ọrụ metụtara ya ga-enye akụkọ 8D ma ọ bụrụ na bọọdụ ọ bụla mebiri emebi.
Bọdụ niile na-apụ apụ ga-abụrịrị 100% eletrọnịkị nwalere, nwale impedance na ire ere.
A na-enyocha anya, anyị na-eme nyocha microsection tupu ebupu ya.
Zụlite echiche nke ndị ọrụ na omenala ụlọ ọrụ anyị, mee ka ha nwee obi ụtọ na ọrụ ha na ụlọ ọrụ anyị, ọ na-enyere ha aka ịmepụta ngwaahịa dị mma.
Ngwa akụrụngwa dị elu (Shengyi FR4, ITEQ, Taiyo Solder Mask ink wdg)
The AOI nwere ike inyocha dum set, mbadamba na-enyocha mgbe ọ bụla usoro
Asambodo
FAQ
Iji hụ na nkwupụta ziri ezi, jide n'aka na itinye ozi ndị a maka ọrụ gị:
Mezue faịlụ GERBER gụnyere ndepụta BOM
l Ọnụ ọgụgụ
l Tụgharịa oge
l chọrọ Panelization
l Ihe achọrọ
l Mechaa chọrọ
l A ga-ebuga ọnụ ahịa omenala gị n'ime naanị awa 2-24, dabere na mgbagwoju anya imewe.
Onye ahịa ọ bụla ga-enwe ire ere iji kpọtụrụ gị.Oge ọrụ anyị: ụtụtụ 9:00-PM 19:00 (Oge Beijing) site na Mọnde ruo Fraịde.Anyị ga-aza email gị ngwa ngwa n'oge ọrụ anyị.Ị nwekwara ike ịkpọtụrụ ahịa anyị site na ekwentị ma ọ bụrụ na ọ dị ngwa ngwa.
ISO9001, ISO14001, UL USA & USA Canada, IFA16949, SGS, RoHS akụkọ.
Usoro anyị na-emesi ike dị ka n'okpuru:
a), Nlele anya
b), nyocha na-efe efe, ngwa nrụnye
c), njikwa mgbochi
d), Nchọpụta ike onye na-ere ere
e), Mikroskopu igwe onyonyo metallo
f), AOI (Nleba anya na-akpaghị aka)
Ee, anyị na-enwe obi ụtọ na-ebunye modul samples iji nwalee na-elele àgwà, agwakọta sample iji dị.Biko mara na onye zụrụ ahịa kwesịrị ịkwụ ụgwọ maka mbupu.
Ọnụego nnyefe n'oge karịrị 95%
a), ntụgharị ọsọ ọsọ awa 24 maka PCB akụkụ abụọ
b), 48hours maka 4-8 oyi akwa prototype PCB
c), 1 awa maka nhota
d), awa 2 maka ajụjụ injinia/nzaghachi mkpesa
e), 7-24 awa maka nkwado teknụzụ / ịtụ ọrụ / nrụpụta ọrụ
ABIS anaghị ahọrọ iwu.A na-anabata ma obere iwu na iwu Mass na anyị ABIS ga-abụ nke siri ike na ọrụ, ma na-ejere ndị ahịa ozi n'ịdị mma na oke.
ABlS na-eme nyocha 100% visual na AOl yana ime nnwale eletriki, nnwale eletrik dị elu, nnwale njikwa impedance, ngalaba micro-sectioning, ule ujo ọkụ, nnwale solder, nnwale ntụkwasị obi, nnwale mgbochi mkpuchi, nnwale ionic ịdị ọcha na nnwale PCBA.
a), ngụ elekere 1
b), nzaghachi mkpesa awa 2
c), nkwado teknụzụ 7 * 24
d), 7*24 ọrụ ịtụ
e), nnyefe awa 7 * 24
f), 7 * 24 mmepụta na-agba ọsọ
| Ike mmepụta nke ngwaahịa ire ere ọkụ | |
| Ụlọ ọrụ PCB akụkụ/Multlayer ugboro abụọ | Ụlọ ọrụ aluminom PCB |
| Ike nka nka | Ike nka nka |
| Akụrụngwa: CEM-1, CEM-3, FR-4 (High TG), Rogers, TELFON | Raw ihe: Aluminom base, ọla kọpa |
| oyi akwa: 1 oyi akwa ruo 20 oyi akwa | oyi akwa: 1 oyi akwa na 2 Layer |
| Obosara Obere ahịrị/Oghere: 3mil/3mil (0.075mm/0.075mm) | Obosara / oghere: 4mil/4mil (0.1mm/0.1mm) |
| Nha oghere Min.: 0.1mm (oghere dirilling) | Min.Oghere oghere: 12mil (0.3mm) |
| Oke.Oke osisi: 1200mm* 600mm | Oke osisi: 1200mm* 560mm(47in* 22in) |
| Ọkpụrụkpụ osisi emechara: 0.2mm- 6.0mm | Ọkpụkpụ osisi emechara: 0.3 ~ 5mm |
| Ọkpụrụkpụ ọla kọpa: 18um ~ 280um (0.5oz ~ 8oz) | Ọkpụrụkpụ ọla kọpa: 35um ~ 210um (1oz ~ 6oz) |
| Nkwadebe NPTH: +/- 0.075mm, PTH oghere ndidi: +/- 0.05mm | Ntachi obi oghere: +/- 0.05mm |
| Nlegide ihe ngosi: +/- 0.13mm | Nlegide ihe nlegharị anya: +/ 0.15mm;nnabata akara ntụmadị:+/ 0.1mm |
| Emechara elu elu: HASL na-enweghị ndu, ọla edo imikpu (ENIG), ọla ọcha imikpu, OSP, plating gold, mkpịsị aka ọla edo, Carbon INK. | Emechara elu elu: HASL n'efu, ọla edo imikpu (ENIG), ọlaọcha imikpu, OSP wdg |
| Nkwekọrịta njikwa mgbochi: +/- 10% | Nlegide ọkpụrụkpụ nke fọdụrụ: +/- 0.1mm |
| Ike mmepụta: 50,000 sqm / ọnwa | MC PCB mmepụta ike: 10,000 sqm / ọnwa |
