6 mbadamba Hard Gold PCB Board nwere ọkpụrụkpụ 3.2mm na Counter Sink Hole
Ozi ndabere
| Nlereanya Mba. | PCB-A37 |
| Ngwungwu njem | Mbukota Vacuum |
| Asambodo | UL, ISO9001&ISO14001, RoHS |
| Ngwa | Eletrọnịkị ndị ahịa |
| Oghere/ Ahịrị kacha nta | 0.075mm / 3mil |
| Ike mmepụta | 50,000 sqm / ọnwa |
| Koodu HS | 853400900 |
| Mmalite | Emebere na china |
Nkọwa ngwaahịa
Okwu Mmalite HDI PCB
A kọwapụtara HDI PCB dị ka bọọdụ sekit ebipụtara nwere njupụta wiring dị elu n'otu mpaghara karịa PCB nkịtị.Ha nwere ahịrị na oghere ndị ka mma, obere vias na mpe mpe akwa, yana njupụta njikọ dị elu karịa nke ejiri na teknụzụ PCB ochie.A na-eme PCB HDI site na microvias, ebe e liri ya na lamination nke usoro nwere ihe mkpuchi yana wiring onye na-eduzi maka njupụta nke ụzọ dị elu.
Ngwa
A na-eji HDI PCB belata nha na ịdị arọ, yana ịkwalite ịrụ ọrụ eletriki nke ngwaọrụ ahụ.HDI PCB bụ ihe kachasị mma maka ọnụ ọgụgụ oyi akwa dị elu yana laminate ọkọlọtọ dị oke ọnụ ma ọ bụ bọọdụ laminated n'usoro.HDI na-ejikọta kpuru ìsì na nke e liri vias nke na-enyere aka ịchekwa ezigbo ala na ụlọ PCB site na ikwe ka e mepụta atụmatụ na ahịrị n'elu ma ọ bụ n'okpuru ha na-enweghị njikọ.Ọtụtụ n'ime ọmarịcha BGA nke taa na akara ukwu akụkụ flip-chip anaghị ekwe ka ị na-agba ọsọ n'etiti paịlị BGA.Vias ndị kpuru ìsì na ndị e liri ga-ejikọ naanị akwa akwa chọrọ njikọ na mpaghara ahụ.
Nka na ụzụ & Ike
| ITEM | IKE | ITEM | IKE |
| N'ígwé | 1-20L | Ọla kọpa kariri | 1-6OZ |
| Ụdị ngwaahịa | HF (High-frequency) & (Redio Frequency) Board, Imedance Control Board, HDIboard, BGA & Fine Pitch board | Ihe mkpuchi solder | Nanya & Taiyo;LRI & Matt Red.akwụkwọ ndụ akwụkwọ ndụ, odo, ọcha, acha anụnụ anụnụ, nwa |
| Ihe ndabere | FR4 (Shengyi China, ITEQ, KB A +, HZ), HITG, FrO6, Rogers, Taconic, Argon, Nalco lsola na na | Egwuchara elu | HASL omenala, HASL na-enweghị ndu,FlashGold,ENIG (lmmersion Gold) OSP (Entek),lmmersion TiN, lmmersion Silver,Hard Gold |
| Usoro ọgwụgwọ elu nke ahọpụtara | ENIG(Gold immersion) + OSP ,ENIG(Gold imikpu) + mkpịsị aka ọla edo, mkpịsị aka ọla edo, immersionSlive + mkpịsị aka ọla edo, imi imi + mkpịsị aka ọla edo | ||
| Nkọwa nka nka | Obosara/ oghere kacha nta: 3.5/4mil (laser Dril) Opekempe kacha nta: 0.15 mm (mechanical drill / 4 mill laser drill) Mgbanaka Afọ Opekempe: 4mil Oke ọla kọpa kacha: 6Oz Oke mmepụta kacha: 600x1200mm Ọkpụrụkpụ osisi: D/S: 0.2-70mm, Multilayers: 0.40-7.Omm Min Solder Mask Bridge: ≥0.08mm Akụkụ akụkụ: 15:1 Ịkwụnye ikike site na: 0.2-0.8mm | ||
| Ndidi | Mkpuchi oghere: ± 0.08mm (min± 0.05) Nkwenye oghere na-abụghị plated: ±O.05min(min+O/-005mm or +0.05/Omm) Nlegide ihe ngosi: ± 0.15min (min± 0.10mm) Nnwale na-arụ ọrụ: Nguzogide ọkụ: 50 ohms (nkịtị) Kpochapụ ike: 14N/mm Nnwale nrụgide okpomọkụ: 265C.20 sekọnd Ihe mkpuchi ihe siri ike: 6H E-ule voltaji: 50ov± 15/-0V 3os Warp na Twist: 0.7% (bọọdụ ule semiconductor 0.3%) | ||
Atụmatụ-Uru Ngwaahịa Anyị
Ihe karịrị afọ 15 emeputa ahụmịhe na ubi ọrụ PCB
Ọnụ ọgụgụ dị ukwuu nke mmepụta na-eme ka ọ bụrụ na ọnụ ahịa ịzụrụ gị dị ala.
Advanced mmepụta ahịrị na-ekwe nkwa kwụsiri ike na ogologo ndụ ogologo
Nnwale 100% maka ngwaahịa PCB ahaziri ahazi
One-nkwụsị Service , anyị nwere ike inyere ịzụta components
Oge ndu Q/T
| Otu | Oge ndu kacha ọsọ | Oge ndu oge |
| Akụkụ abụọ | elekere 24 | elekere 120 |
| 4 N'ígwé | elekere 48 | elekere 172 |
| 6 N'ígwé | elekere 72 | elekere 192 |
| 8 akwa akwa | elekere 96 | elekere 212 |
| 10 n'ígwé | elekere 120 | elekere 268 |
| 12 n'ígwé | elekere 120 | 280h |
| 14 N'ígwé | elekere 144 | 292h |
| 16-20 n'ígwé | Dabere na ihe achọrọ | |
| N'elu 20 Layer | Dabere na ihe achọrọ | |
Ntugharị ABIS jikwaa FR4 PCBS
Nkwadebe oghere
Wepụ ihe mkpofu nke ọma & na-edozi paramita igwe ihe: tupu etinye ya na ọla kọpa, ABIS na-elebara oghere niile dị na PCB FR4 anya iji wepụ irighiri ihe, mmebi nke elu na epoxy smear, oghere ndị dị ọcha na-ahụ na platin na-agbaso mgbidi oghere ahụ nke ọma. .Ọzọkwa, n'oge usoro a, a na-edozi parampat igwe na-egwupụta ihe nke ọma.
Nkwadebe elu
Deburing nke ọma: ndị ọrụ teknụzụ anyị nwere ahụmahụ ga-amata tupu oge eruo na naanị otu ụzọ isi zere nsonaazụ ọjọọ bụ ịtụ anya mkpa ọ dị maka njikwa pụrụ iche na ime usoro kwesịrị ekwesị iji jide n'aka na ejiri nlezianya mee usoro ahụ nke ọma.
Ọnụego Mgbasawanye okpomọkụ
N'ịmekọrịta ihe dị iche iche, ABIS ga-enwe ike nyochaa nchikota iji jide n'aka na ọ dị mma.wee debe ntụkwasị obi ogologo oge nke CTE (ọnụọgụ nke mgbasawanye thermal), na CTE dị ala, ọ ga-abụrịrị na nke a na-etinye n'ime oghere ga-adaba site na mgbanwe nke ọla kọpa ugboro ugboro nke na-etolite njikọ njikọta nke oyi akwa.
Ịtụle
ABIS na-achịkwa sekit a na-ebuli elu site na pasentị ama ama na atụmanya nke ọnwụ a ka ọkwa ndị ahụ ga-alaghachi n'ụdị ha haziri ka emechara okirikiri lamination.Ọzọkwa, na-eji laminate emeputa ndabere scaling ntụnye na nchikota na n'ime-ụlọ statistical usoro njikwa data, na-ịkpọ-n'ọnụ ọgụgụ ihe ga-agbanwe agbanwe ka oge na-aga n'ime otu ebe mmepụta ihe.
Ịrụ igwe
Mgbe oge ruru iji wuo PCB gị, ABIS jide n'aka na ịhọrọ nwere akụrụngwa na ahụmịhe kwesịrị ekwesị iji mepụta ya
Ọrụ ịdịmma ABIS
Ọnụego ngafe nke ihe na-abata n'elu 99.9%, ọnụ ọgụgụ nke nnabata ọnụ ọgụgụ dị n'okpuru 0.01%.
Ụlọ ọrụ ABIS kwadoro na-achịkwa usoro niile dị mkpa iji kpochapụ nsogbu niile nwere ike tupu ha emepụta.
ABIS na-eji sọftụwia dị elu rụọ nnukwu nyocha DFM na data na-abata, ma na-eji sistemụ njikwa ogo dị elu n'oge usoro nrụpụta.
ABIS na-eme nyocha 100% visual na AOI yana ime nnwale eletriki, nnwale voltaji dị elu, nnwale njikwa impedance, micro-sectioning, thermal shock test, solder test, trust test, insulating insulating test and ionic cleanness test.
Asambodo
FAQ
Ọtụtụ n'ime ha sitere na Shengyi Technology Co., Ltd. (SYTECH), bụ onye na-emepụta CCL nke abụọ n'ụwa n'ihe gbasara olu ahịa, site na 2013 ruo 2017. Anyị guzobere ogologo oge mmekọrịta nke imekọ ihe ọnụ kemgbe 2006. The FR4 resin material. (Model S1000-2, S1141, S1165, S1600) na-tumadi eji maka ime otu na abụọ-kwadoro biri ebi sekit mbadamba nakwa dị ka multi-layer mbadamba.Nke a na-abịa nkọwa maka ntụaka gị.
Maka FR-4: Sheng Yi, King Board, Nan Ya, Polycard, ITEQ, ISOLA
Maka CEM-1 & CEM 3: Sheng Yi, King Board
Maka oge dị elu: Sheng Yi
Maka ọgwụgwọ UV: Tamura, Chang Xing (* Agba dị: Green) ihe mgbakwasa maka otu akụkụ
Maka Foto Liquid: Tao Yang, guzogide (Ihe nkiri Wet)
Chuan Yu (* Agba dị: ọcha, odo odo, Purple, Red, Blue, Green, Black)
), Nhota elekere 1
b), nzaghachi mkpesa awa 2
c), nkwado teknụzụ 7 * 24
d), 7*24 ọrụ ịtụ
e), nnyefe awa 7 * 24
f), 7 * 24 mmepụta na-agba ọsọ
Mba, anyị enweghị ike ịnakwere faịlụ foto, ọ bụrụ na ịnweghị faịlụ Gerber, ị nwere ike iziga anyị nlele ka anyị detuo ya.
Usoro nṅomi PCB&PCBA:
Usoro anyị na-emesi ike dị ka n'okpuru:
a), Nlele anya
b), nyocha na-efe efe, ngwa nrụnye
c), njikwa mgbochi
d), Nchọpụta ike onye na-ere ere
e), Mikroskopu igwe onyonyo metallo
f), AOI (Nleba anya na-akpaghị aka)
Ọnụego nnyefe n'oge karịrị 95%
a), ntụgharị ọsọ ọsọ awa 24 maka PCB akụkụ abụọ
b),48hours maka 4-8 n'ígwé ụdị PCB
c),1 hour maka nhota
d), awa 2 maka ajụjụ injinia/nzaghachi mkpesa
e),7-24 awa maka ọrụ nkwado teknụzụ / ịtụ ọrụ / nrụpụta ọrụ
ABIS enweghị MOQ chọrọ maka PCB ma ọ bụ PCBA.
ABlS na-eme nyocha 100% visual na AOl yana ime nnwale eletriki, nnwale eletrik dị elu, nnwale njikwa impedance, ngalaba micro-sectioning, ule ujo ọkụ, nnwale solder, nnwale ntụkwasị obi, nnwale mgbochi mkpuchi, nnwale ionic ịdị ọcha na nnwale PCBA.
Isi ụlọ ọrụ ABIS: njikwa ụlọ ọrụ, nkwukọrịta, ngwaahịa ụgbọ ala na ahụike.Ahịa isi nke ABIS: 90% Market International (40% -50% maka USA, 35% maka Europe, 5% maka Russia na 5% -10% maka East Asia) na 10% Ahịa ụlọ.
| Ike mmepụta nke ngwaahịa ire ere ọkụ | |
| Ụlọ ọrụ PCB akụkụ/Multlayer ugboro abụọ | Ụlọ ọrụ aluminom PCB |
| Ike nka nka | Ike nka nka |
| Akụrụngwa: CEM-1, CEM-3, FR-4 (High TG), Rogers, TELFON | Raw ihe: Aluminom base, ọla kọpa |
| oyi akwa: 1 oyi akwa ruo 20 oyi akwa | oyi akwa: 1 oyi akwa na 2 Layer |
| Obosara Obere ahịrị/Oghere: 3mil/3mil (0.075mm/0.075mm) | Obosara / oghere: 4mil/4mil (0.1mm/0.1mm) |
| Nha oghere Min.: 0.1mm (oghere dirilling) | Min.Oghere oghere: 12mil (0.3mm) |
| Oke.Oke osisi: 1200mm* 600mm | Oke osisi: 1200mm* 560mm(47in* 22in) |
| Ọkpụrụkpụ osisi emechara: 0.2mm- 6.0mm | Ọkpụkpụ osisi emechara: 0.3 ~ 5mm |
| Ọkpụrụkpụ ọla kọpa: 18um ~ 280um (0.5oz ~ 8oz) | Ọkpụrụkpụ ọla kọpa: 35um ~ 210um (1oz ~ 6oz) |
| Nkwadebe NPTH: +/- 0.075mm, PTH oghere ndidi: +/- 0.05mm | Ntachi obi oghere: +/- 0.05mm |
| Nlegide ihe ngosi: +/- 0.13mm | Nlegide ihe nlegharị anya: +/ 0.15mm;nnabata akara ntụmadị:+/ 0.1mm |
| Emechara elu elu: HASL na-enweghị ndu, ọla edo imikpu (ENIG), ọla ọcha imikpu, OSP, plating gold, mkpịsị aka ọla edo, Carbon INK. | Emechara elu elu: HASL n'efu, ọla edo imikpu (ENIG), ọlaọcha imikpu, OSP wdg |
| Nkwekọrịta njikwa mgbochi: +/- 10% | Nlegide ọkpụrụkpụ nke fọdụrụ: +/- 0.1mm |
| Ike mmepụta: 50,000 sqm / ọnwa | MC PCB mmepụta ike: 10,000 sqm / ọnwa |
