China ahaziri PCB dị elu maka GPS nwere ENIG na mkpịsị aka ọla edo
Ozi ndabere
| Nlereanya Mba. | PCB-A51 |
| Ngwungwu njem | Mbukota Vacuum |
| Asambodo | UL, ISO9001&ISO14001, RoHS |
| Ngwa | Eletrọnịkị ndị ahịa |
| Oghere/ Ahịrị kacha nta | 0.075mm / 3mil |
| Ike mmepụta | 50,000 sqm / ọnwa |
| Koodu HS | 853400900 |
| Mmalite | Emebere na china |
Nkọwa ngwaahịa
FR4 PCB Okwu Mmalite
FR pụtara "ọkụ na-ere ọkụ," FR-4 (ma ọ bụ FR4) bụ ọkwa ọkwa NEMA maka ihe eji eme epoxy laminate na-eme ka iko sie ike, ihe ngwakọta nke nwere akwa fiberglass kpara nke nwere eriri resin epoxy nke na-eme ka ọ bụrụ ihe dị mma maka ihe eletrik. na bọọdụ sekit e biri ebi.
Uru na ọghọm nke FR4 PCB
Ihe FR-4 na-ewu ewu nke ukwuu n'ihi ọtụtụ àgwà ya dị ebube nke nwere ike ịba uru na bọọdụ sekit e biri ebi.Na mgbakwunye na ịbụ ọnụ ala ma dị mfe iji rụọ ọrụ, ọ bụ ihe mkpuchi eletrik nwere ike dielectric dị elu.Na mgbakwunye, ọ na-adịgide adịgide, mmiri na-eguzogide mmiri, ọ na-eguzogide okpomọkụ yana ịdị arọ.
FR-4 bụ ihe dị mkpa n'ọtụtụ ebe, na-ewu ewu nke ukwuu maka ọnụ ala ya dị ala yana nkwụsi ike igwe na eletriki.Ọ bụ ezie na ihe a nwere uru bara ụba ma dị n'ụdị nha na nha dị iche iche, ọ bụghị nhọrọ kacha mma maka ngwa ọ bụla, ọkachasị ngwa ugboro ugboro dị ka RF na ngwa ngwa ngwa.
Ọdịdị PCB ọtụtụ oyi akwa
Multilayer PCBs na-abawanye mgbagwoju anya na njupụta nke atụmatụ PCB site n'ịgbakwunye ọkwa ndị ọzọ gafere elu na ala ala a na-ahụ na mbadamba akụkụ abụọ.A na-ewu PCB multilayer site n'ịkwado akwa dị iche iche.A na-achịkọta akwa dị n'ime, nke na-ejikarị bọọdụ sekit nwere akụkụ abụọ, yana akwa mkpuchi n'etiti na n'etiti foil ọla kọpa maka elu elu.Oghere ndị a gbapụrụ site na osisi (vias) ga-eme ka njikọ dị iche iche dị iche iche nke osisi ahụ.
Nka na ụzụ & Ike
| Ihe | Ike mmepụta |
| Ngụkọta oyi akwa | 1-32 |
| Ihe onwunwe | FR-4, High TG FR-4, PTFE, Aluminom Base, Cu base, Rogers, Teflon, wdg |
| Oke kacha | 600mm x 1200mm |
| Nkwenye nkọwapụta bọọdụ | ± 0.13mm |
| Ọkpụrụkpụ osisi | 0.20mm-8.00mm |
| Nkwadebe ịdị arọ (t≥0.8mm) | ± 10% |
| Ọkpụrụkpụ Tolerancc (t <0.8mm) | ± 0.1mm |
| Ihe mkpuchi oyi akwa Thickncss | 0.075mm-5.00mm |
| Iine kacha nta | 0.075 mm |
| Oghere kacha nta | 0.075 mm |
| Ọbara ọla kọpa na-apụ apụ | 18um-350um |
| Ọbara ọla kọpa dị n'ime Layer | 17um-175um |
| Oghere ogbunigwe (Mechanical) | 0.15mm-6.35mm |
| Ngwucha oghere(Mechanical) | 0.10mm-6.30mm |
| Nkwekọrịta dayameta (Mechanical) | 0.05mm |
| Ndebanye aha(Mechanical) | 0.075 mm |
| Ọnụego Aspecl | 16:01 |
| Ụdị nkpuchi solder | LPI |
| Obosara nkpuchi SMT Mini.Solder | 0.075 mm |
| Mini.Solder nkpuchi mkpochapụ | 0.05mm |
| Nkwụnye dayameta | 0.25mm-0.60mm |
| Nnagide Mgbochi Mgbochi | 10% |
| Emecha elu elu | HASL/HASL-LF, ENIG, Immersion Tin/Silver, Flash Gold, OSP, mkpịsị aka ọla edo, ọla edo siri ike |
Ebee ka ihe resin si abịa na ABIS?
Ọtụtụ n'ime ha sitere na Shengyi Technology Co., Ltd. (SYTECH), bụ onye na-emepụta CCL nke abụọ n'ụwa n'ihe gbasara olu ahịa, site na 2013 ruo 2017. Anyị guzobere ogologo oge mmekọrịta nke imekọ ihe ọnụ kemgbe 2006. The FR4 resin material. (Model S1000-2, S1141, S1165, S1600) na-tumadi eji maka ime otu na abụọ-kwadoro biri ebi sekit mbadamba nakwa dị ka multi-layer mbadamba.Nke a na-abịa nkọwa maka ntụaka gị.
Maka FR-4: Sheng Yi, King Board, Nan Ya, Polycard, ITEQ, ISOLA
Maka CEM-1 & CEM 3: Sheng Yi, King Board
Maka oge dị elu: Sheng Yi
Maka ọgwụgwọ UV: Tamura, Chang Xing (* Agba dị: Green) ihe mgbakwasa maka otu akụkụ
Maka Foto Liquid: Tao Yang, guzogide (Ihe nkiri Wet)
Chuan Yu (* Ọ dịagba: Ọcha, odo odo, Purple, Red, Blue, Green, Black)
Usoro mmepụta PCB
Usoro na-amalite site n'ichebe okirikiri nhọrọ ukwuu nke PCB site na iji PCB emebe software / CAD Tool (Proteus, Eagle, ma ọ bụ CAD).
Usoro ndị ọzọ niile bụ usoro nrụpụta nke bọọdụ sekit siri ike bụ otu ihe dị ka PCB Sided ma ọ bụ PCB akụkụ abụọ ma ọ bụ PCB Multi-layer.
Oge ndu Q/T
| Otu | Oge ndu kacha ọsọ | Oge ndu oge |
| Akụkụ abụọ | elekere 24 | elekere 120 |
| 4 N'ígwé | elekere 48 | elekere 172 |
| 6 N'ígwé | elekere 72 | elekere 192 |
| 8 akwa akwa | elekere 96 | elekere 212 |
| 10 n'ígwé | elekere 120 | elekere 268 |
| 12 n'ígwé | elekere 120 | 280h |
| 14 N'ígwé | elekere 144 | 292h |
| 16-20 n'ígwé | Dabere na ihe achọrọ | |
| N'elu 20 Layer | Dabere na ihe achọrọ | |
Ntugharị ABIS jikwaa FR4 PCBS
Nkwadebe oghere
Wepụ ihe mkpofu nke ọma & na-edozi paramita igwe ihe: tupu etinye ya na ọla kọpa, ABIS na-elebara oghere niile dị na PCB FR4 anya iji wepụ irighiri ihe, mmebi nke elu na epoxy smear, oghere ndị dị ọcha na-ahụ na platin na-agbaso mgbidi oghere ahụ nke ọma. .Ọzọkwa, n'oge usoro a, a na-edozi parampat igwe na-egwupụta ihe nke ọma.
Nkwadebe elu
Deburing nke ọma: ndị ọrụ teknụzụ anyị nwere ahụmahụ ga-amata tupu oge eruo na naanị otu ụzọ isi zere nsonaazụ ọjọọ bụ ịtụ anya mkpa ọ dị maka njikwa pụrụ iche na ime usoro kwesịrị ekwesị iji jide n'aka na ejiri nlezianya mee usoro ahụ nke ọma.
Ọnụego Mgbasawanye okpomọkụ
N'ịmekọrịta ihe dị iche iche, ABIS ga-enwe ike nyochaa nchikota iji jide n'aka na ọ dị mma.wee debe ntụkwasị obi ogologo oge nke CTE (ọnụọgụ nke mgbasawanye thermal), na CTE dị ala, ọ ga-abụrịrị na nke a na-etinye n'ime oghere ga-adaba site na mgbanwe nke ọla kọpa ugboro ugboro nke na-etolite njikọ njikọta nke oyi akwa.
Ịtụle
ABIS na-achịkwa sekit a na-ebuli elu site na pasentị ama ama na atụmanya nke ọnwụ a ka ọkwa ndị ahụ ga-alaghachi n'ụdị ha haziri ka emechara okirikiri lamination.Ọzọkwa, na-eji laminate emeputa ndabere scaling ntụnye na nchikota na n'ime-ụlọ statistical usoro njikwa data, na-ịkpọ-n'ọnụ ọgụgụ ihe ga-agbanwe agbanwe ka oge na-aga n'ime otu ebe mmepụta ihe.
Ịrụ igwe
Mgbe oge ruru iji wuo PCB gị, ABIS jide n'aka na ịhọrọ nwere akụrụngwa na ahụmịhe iji mepụta ya nke ọma na nnwale mbụ.
Ọrụ ịdịmma ABIS
Ọnụego ngafe nke ihe na-abata n'elu 99.9%, ọnụ ọgụgụ nke nnabata ọnụ ọgụgụ dị n'okpuru 0.01%.
Ụlọ ọrụ ABIS kwadoro na-achịkwa usoro niile dị mkpa iji kpochapụ nsogbu niile nwere ike tupu ha emepụta.
ABIS na-eji sọftụwia dị elu rụọ nnukwu nyocha DFM na data na-abata, ma na-eji sistemụ njikwa ogo dị elu n'oge usoro nrụpụta.
ABIS na-eme nyocha 100% visual na AOI yana ime nnwale eletriki, nnwale voltaji dị elu, nnwale njikwa impedance, micro-sectioning, thermal shock test, solder test, trust test, insulating insulating test and ionic cleanness test.
Asambodo
Gịnị mere ịhọrọ anyị?
- Igwe eji euipment dị elu dị elu nke nwere ike hazie ihe dịka 25,000 SMD kwa elekere.
- Ike ọkọnọ dị elu nke ọma 60K Sqm kwa ọnwa-Na-enye obere olu na mmepụta PCB na-achọ, yana mmepụta buru ibu.
- Ndị otu injinia ọkachamara-40 injinia na ụlọ akụrụngwa nke ha, siri ike na OEM.Na-enye nhọrọ abụọ dị mfe: Omenala na Ọkọlọtọ-Ọmụma omimi nke IPC Class II na III Standards
Anyị na-enye ndị ahịa chọrọ ka anyị kpọkọta PCB n'ime PCBA, gụnyere ihe atụ, ọrụ NPI, obere na ọkara olu.Anyị nwekwara ike iwepụta akụrụngwa niile maka ọrụ mgbakọ PCB gị.Ndị injinia anyị na ndị otu na-egwupụta ihe nwere ahụmịhe bara ụba na agbụ ọkọnọ na ụlọ ọrụ EMS, nwere ihe ọmụma miri emi na mgbakọ SMT na-enye ohere iji dozie nsogbu mmepụta niile.Ọrụ anyị na-efu ọnụ, na-agbanwe agbanwe, yana ntụkwasị obi.Anyị nwere afọ ojuju ndị ahịa n'ofe ọtụtụ ụlọ ọrụ gụnyere ahụike, ụlọ ọrụ mmepụta ihe, ụgbọ ala na ngwa eletrọnịkị ndị ahịa.
FAQ
Main Suppliers(FR4): Kingboard (Hong Kong), NanYa (Taiwan), na Shengyi (China), Ọ bụrụ ndị ọzọ, biko RFQ.
Achọpụtara ya n'ime awa iri na abụọ.Ozugbo a nyochara ajụjụ Injinia na faịlụ na-arụ ọrụ, anyị ga-amalite mmepụta ahụ.
Mba, anyị enweghị ike ịnakwere faịlụ foto, ọ bụrụ na ịnweghị faịlụ gerber, ị nwere ike iziga anyị nlele ka anyị detuo ya.
Usoro nṅomi PCB&PCBA:
Usoro anyị na-emesi ike dị ka n'okpuru:
a), Nlele anya
b), nyocha na-efe efe, ngwa nrụnye
c), njikwa mgbochi
d), Nchọpụta ike onye na-ere ere
e), Mikroskopu igwe onyonyo metallo
f), AOI (Nleba anya na-akpaghị aka)
Ee, anyị na-enwe obi ụtọ na-ebunye modul samples iji nwalee na-elele àgwà, agwakọta sample iji dị.Biko mara na onye zụrụ ahịa kwesịrị ịkwụ ụgwọ maka mbupu.
Ọnụego nnyefe n'oge karịrị 95%
a), ntụgharị ọsọ ọsọ awa 24 maka PCB akụkụ abụọ
b), 48hours maka 4-8 oyi akwa prototype PCB
c), 1 awa maka nhota
d), awa 2 maka ajụjụ injinia/nzaghachi mkpesa
e), 7-24 awa maka nkwado teknụzụ / ịtụ ọrụ / nrụpụta ọrụ
ABlS na-eme nyocha 100% visual na AOl yana ime nnwale eletriki, nnwale voltaji dị elu, nnwale impedancecontrol, ngalaba micro, nnwale ujo, nnwale solder, nnwale ntụkwasị obi, nnwale mkpuchi mkpuchi., ule ịdị ọcha ionna PCBA arụ ọrụ ule.
| Ike mmepụta nke ngwaahịa ire ere ọkụ | |
| Ụlọ ọrụ PCB akụkụ/Multlayer ugboro abụọ | Ụlọ ọrụ aluminom PCB |
| Ike nka nka | Ike nka nka |
| Akụrụngwa: CEM-1, CEM-3, FR-4 (High TG), Rogers, TELFON | Raw ihe: Aluminom base, ọla kọpa |
| oyi akwa: 1 oyi akwa ruo 20 oyi akwa | oyi akwa: 1 oyi akwa na 2 Layer |
| Obosara Obere ahịrị/Oghere: 3mil/3mil (0.075mm/0.075mm) | Obosara / oghere: 4mil/4mil (0.1mm/0.1mm) |
| Nha oghere Min.: 0.1mm (oghere dirilling) | Min.Oghere oghere: 12mil (0.3mm) |
| Oke.Oke osisi: 1200mm* 600mm | Oke osisi: 1200mm* 560mm(47in* 22in) |
| Ọkpụrụkpụ osisi emechara: 0.2mm- 6.0mm | Ọkpụkpụ osisi emechara: 0.3 ~ 5mm |
| Ọkpụrụkpụ ọla kọpa: 18um ~ 280um (0.5oz ~ 8oz) | Ọkpụrụkpụ ọla kọpa: 35um ~ 210um (1oz ~ 6oz) |
| Nkwadebe NPTH: +/- 0.075mm, PTH oghere ndidi: +/- 0.05mm | Ntachi obi oghere: +/- 0.05mm |
| Nlegide ihe ngosi: +/- 0.13mm | Nlegide ihe nlegharị anya: +/ 0.15mm;nnabata akara ntụmadị:+/ 0.1mm |
| Emechara elu elu: HASL na-enweghị ndu, ọla edo imikpu (ENIG), ọla ọcha imikpu, OSP, plating gold, mkpịsị aka ọla edo, Carbon INK. | Emechara elu elu: HASL n'efu, ọla edo imikpu (ENIG), ọlaọcha imikpu, OSP wdg |
| Nkwekọrịta njikwa mgbochi: +/- 10% | Nlegide ọkpụrụkpụ nke fọdụrụ: +/- 0.1mm |
| Ike mmepụta: 50,000 sqm / ọnwa | MC PCB mmepụta ike: 10,000 sqm / ọnwa |
a), ngụ elekere 1
b), nzaghachi mkpesa awa 2
c), nkwado teknụzụ 7 * 24
d), 7*24 ọrụ ịtụ
e), nnyefe awa 7 * 24
f), 7 * 24 mmepụta na-agba ọsọ
Usoro nkwado anyị dị ka n'okpuru:
a), Nlele anya
b), Nchọpụta na-efe efe, ngwa nrụnye
c), njikwa mgbochi
d), Nchọpụta ike onye na-ere ere
e), Mikroskopu metallogram dijitalụ
f),AOI(Nyocha anya akpaaka)
