Ihe nhazi 6 Layers Rigid-Flex PCB Board nwere 3.0oz ọla kọpa na ENIG 2u" elu elu.
Ozi ndabere
| Nlereanya Mba. | PCB-A35 |
| Ngwungwu njem | Mbukota Vacuum |
| Asambodo | UL, ISO9001&ISO14001, RoHS |
| Nkọwa | IPC Klas2 |
| Oghere/ Ahịrị kacha nta | 0.075mm / 3mil |
| Njikwa mgbochi | 50±10% |
| Ike mmepụta | 720,000 M2/Afọ |
| Mmalite | Emebere na china |
Nkọwa ngwaahịa
Nlebanya bọọdụ sekit ebipụta nke na-agbanwe agbanwe
Ihe pụtara n'ezie "rigid-flex" bụ nchikota uru nke ma bọọdụ na-agbanwe agbanwe na nke siri ike.A na-ahụ ya ka sekit abụọ n'ime otu na-ejikọta ọnụ site na oghere plated.Sekit flex siri ike na-eme ka njupụta akụrụngwa dị elu ma na-adaba na oghere nwere oke na nke na-adịghị mma.
bọọdụ sekit e biri ebi siri ike na-agbanwe agbanwe nwere ọtụtụ okirikiri ime sekit na-agbanwe agbanwe nke a na-ahọrọ jikọtara ọnụ site na iji ihe nkiri njikọ nke pre-preg epoxy, yiri sekit na-agbanwe agbanwe multilayer.Ejirila sekit flex siri ike na ụlọ ọrụ ndị agha na ikuku ihe karịrị afọ 20.N'ọtụtụ bọọdụ sekit flex siri ike.
Nka na ụzụ & Ike
| Ihe | Ike mmepụta |
| Ngụkọta oyi akwa | 1-32 |
| Ihe onwunwe | FR-4, High TG FR-4, PTFE, Aluminom Base, Cu base, Rogers, Teflon, wdg |
| Oke kacha | 600mm x 1200mm |
| Nkwenye nkọwapụta bọọdụ | ± 0.13mm |
| Ọkpụrụkpụ osisi | 0.20mm-8.00mm |
| Nkwadebe ịdị arọ (t≥0.8mm) | ± 10% |
| Ọkpụrụkpụ Tolerancc (t <0.8mm) | ± 0.1mm |
| Ihe mkpuchi oyi akwa Thickncss | 0.075mm--5.00mm |
| Iine kacha nta | 0.075 mm |
| Oghere kacha nta | 0.075 mm |
| Ọbara ọla kọpa na-apụ apụ | 18um--350um |
| Ọbara ọla kọpa dị n'ime Layer | 17um--175um |
| Oghere ogbunigwe (Mechanical) | 0.15mm--6.35mm |
| Ngwucha oghere(Mechanical) | 0.10mm--6.30mm |
| Nkwekọrịta dayameta (Mechanical) | 0.05mm |
| Ndebanye aha(Mechanical) | 0.075 mm |
| Ọnụego Aspecl | 16:01 |
| Ụdị nkpuchi solder | LPI |
| Obosara nkpuchi SMT Mini.Solder | 0.075 mm |
| Mini.Solder nkpuchi mkpochapụ | 0.05mm |
| Nkwụnye dayameta | 0.25mm - 0.60mm |
| Nnagide Mgbochi Mgbochi | 10% |
| Emecha elu elu | HASL/HASL-LF, ENIG, Immersion Tin/Silver, Flash Gold, OSP, mkpịsị aka ọla edo, ọla edo siri ike |
Ike nrụpụta - (Flex)
| ihe | nkeji | ||||||
| Oke n'ígwé | oyi akwa | 10 | |||||
| Ihe ndabere (Polymide) | μm | 9, 12, 18, 35, 70 | |||||
| Ọla kọpa | μm | 18,35,70 | |||||
| Ihe mkpuchi (Polymide) | μm | 27.5, 37.5, 50, 75 | |||||
| Simenti na-ekpo ọkụ | μm | 13, 25 | |||||
| Oke Ogwe kacha | mm | 250*800 | 250 * 1500 maka 10 Layers | ||||
| Nha Panel kacha nta | mm | Dabere na ndị ahịa | |||||
| Ọkpụrụkpụ bọọdụ Emechara Kachasị | mm | 0.7 | |||||
| Ọkpụrụkpụ bọọdụ Emechara kacha nta | mm | 0.057 mm | |||||
| Nha oghere nha | mm | ± 0.05mm | |||||
| Opekempe Site na oghere | mm | 0.1mm | |||||
| Opekempe Site na oghere oghere | mm | 0.3mm | 0.25mm Pụrụ iche | ||||
| Ọkpụrụkpụ ọla kọpa kacha | OZ | 2 | |||||
| Ọkpụrụkpụ ọla kọpa kacha nta | OZ | 1/4 | |||||
| Ọkpụrụkpụ ọla kọpa | μm | 8-20 | |||||
| Ọbara ọla kọpa PTH | μm | 8-20 | |||||
| Obosara/Oghere Ahịrị kacha nta | mm | 0.05 | |||||
| Egwuchaala elu | / | Ni, Au, Sn | |||||
Oge ndu PCB na-agbanwe agbanwe
| Obere ogbeOlu ≤1 square mita | Ụbọchị ọrụ | Mmepụta Mass | Ụbọchị ọrụ |
| Otu akụkụ | 3-4 | Otu akụkụ | 8-10 |
| 2-4 n'ígwé | 4-5 | 2-4 n'ígwé | 10-12 |
| 6-8 n'ígwé | 10-12 | 6-8 n'ígwé | 14-18 |
Uru nke ABIS
- Akụrụngwa dị elu-igwe na-ebu na ebe dị elu nke nwere ike ịhazi ihe dịka 25,000 SMD kwa elekere.
- Ike ọkọnọ dị elu nke ọma 60K Sqm kwa ọnwa-Na-enye obere olu na mmepụta PCB na-achọ, yana mmepụta buru ibu.
- Ndị otu injinia ọkachamara-40 injinia na ụlọ akụrụngwa nke ha, siri ike na OEM.Na-enye nhọrọ abụọ dị mfe: Omenala na Ọkọlọtọ-Ọmụma omimi nke IPC Class II na III Standards
Anyị na-enye ndị ahịa na-achọ ka anyị kpọkọta PCB n'ime PCBA ọrụ zuru oke, gụnyere prototypes, ọrụ NPI, obere na ọkara mpịakọta.Anyị nwekwara ike iwepụta akụrụngwa niile maka ọrụ mgbakọ PCB gị.Ndị injinia anyị na ndị otu na-egwupụta ihe nwere ahụmịhe bara ụba na agbụ ọkọnọ na ụlọ ọrụ EMS, nwere ihe ọmụma miri emi na mgbakọ SMT na-enye anyị ohere idozi nsogbu nrụpụta niile.Ọrụ anyị na-efu ọnụ, na-agbanwe agbanwe, yana ntụkwasị obi.Anyị nwere afọ ojuju ndị ahịa n'ofe ọtụtụ ụlọ ọrụ gụnyere ọgwụ, ụlọ ọrụ mmepụta ihe, ụgbọ ala, na ngwa eletrọnịkị ndị ahịa.
Asambodo
FAQ
Isi ụlọ ọrụ ABIS: njikwa ụlọ ọrụ, nkwukọrịta, ngwaahịa ụgbọ ala na ahụike.Ahịa isi nke ABIS: 90% Market International (40% -50% maka USA, 35% maka Europe, 5% maka Russia na 5% -10% maka East Asia) na 10% Ahịa ụlọ.
Main Suppliers(FR4): Kingboard (Hong Kong), NanYa (Taiwan), na Shengyi (China), Ọ bụrụ ndị ọzọ, biko RFQ.
Usoro anyị na-emesi ike dị ka n'okpuru:
a), Nlele anya
b), nyocha na-efe efe, ngwa nrụnye
c), njikwa mgbochi
d), Nchọpụta ike onye na-ere ere
e), Mikroskopu dijitalụ metallogram
f), AOI (Nleba anya na-akpaghị aka)
N'ozuzu, 2-3 ụbọchị maka ime sample.Oge ndu nke mmepụta oke ga-adabere n'ọtụtụ usoro na oge ị na-etinye iwu.
Usoro anyị na-emesi ike dị ka n'okpuru:
a), Nlele anya
b), nyocha na-efe efe, ngwa nrụnye
c), njikwa mgbochi
d), Nchọpụta ike onye na-ere ere
e), Mikroskopu dijitalụ metallogram
f), AOI (Nleba anya na-akpaghị aka)
ABlS na-eme nyocha 100% visual na AOl yana ime nnwale eletriki, nnwale voltaji dị elu, nnwale impedancecontrol, ngalaba micro, nnwale ujo, nnwale solder, nnwale ntụkwasị obi, nnwale mkpuchi mkpuchi., ule ịdị ọcha ionna PCBA arụ ọrụ ule.
ABlS na-eme nyocha 100% visual na AOl yana ime nnwale eletriki, nnwale eletrik dị elu, nnwale njikwa impedance, ngalaba micro-sectioning, ule ujo ọkụ, nnwale solder, nnwale ntụkwasị obi, nnwale mgbochi mkpuchi, nnwale ionic ịdị ọcha na nnwale PCBA.
ABIS enweghị MOQ chọrọ maka PCB ma ọ bụ PCBA.
Ọnụego nnyefe n'oge karịrị 95%
a), ntụgharị ọsọ ọsọ awa 24 maka PCB akụkụ abụọ
b), 48hours maka 4-8 oyi akwa prototype PCB
c), 1 awa maka nhota
d), awa 2 maka ajụjụ injinia/nzaghachi mkpesa
e), 7-24 awa maka nkwado teknụzụ / ịtụ ọrụ / nrụpụta ọrụ
