Bọdụ sekit PCB Rigid-Flex ahaziri maka Bluetooth na ngwaọrụ Wearable
Ozi ndabere
| Nlereanya Mba. | PCB-A31 |
| Ngwungwu njem | Mbukota Vacuum |
| Asambodo | UL, ISO9001&ISO14001, RoHS |
| Nkọwa | IPC Klas2 |
| Oghere/ Ahịrị kacha nta | 0.075mm / 3mil |
| Njikwa mgbochi | 50±10% |
| Ike mmepụta | 720,000 M2/Afọ |
| Mmalite | Emebere na china |
Nkọwa ngwaahịa
Nlebanya bọọdụ sekit ebipụta nke na-agbanwe agbanwe
Ihe pụtara n'ezie "rigid-flex" bụ nchikota uru nke ma bọọdụ na-agbanwe agbanwe na nke siri ike.A na-ahụ ya ka sekit abụọ n'ime otu na-ejikọta ọnụ site na oghere plated.Sekit flex siri ike na-eme ka njupụta akụrụngwa dị elu ma na-adaba na oghere nwere oke na nke na-adịghị mma.
bọọdụ sekit e biri ebi siri ike na-agbanwe agbanwe nwere ọtụtụ okirikiri ime sekit na-agbanwe agbanwe nke a na-ahọrọ jikọtara ọnụ site na iji ihe nkiri njikọ nke pre-preg epoxy, yiri sekit na-agbanwe agbanwe multilayer.Ejirila sekit flex siri ike na ụlọ ọrụ ndị agha na ikuku ihe karịrị afọ 20.N'ọtụtụ bọọdụ sekit flex siri ike.
Nka na ụzụ & Ike
| Ihe | Nkọwa. |
| N'ígwé | 1 ~ 8 |
| Ọkpụrụkpụ osisi | 0.1mm-8.0mm |
| Ihe onwunwe | Polymide, PET, PEN, FR4
|
| Oke panel nke kachasị | 600mm × 1200mm |
| Nha oghere min | 0.1mm |
| Ogologo Ahịrị Obere/Oghere | 3mil (0.075mm) |
| Nkwenye nkọwapụta bọọdụ | 0.10mm |
| Mkpuchi oyi akwa | 0.075mm--5.00mm |
| Ọkpụrụkpụ Ikpeazụ | 0.0024 ''-0.16'' (0.06-2.4.00mm) |
| Oghere mkpọpu (Mechanical) | 17um--175um |
| Ngwucha oghere (Mechanical) | 0.10mm--6.30mm |
| Nlegide Dayameta (Mechanical) | 0.05mm |
| Ndebanye aha (Mechanical) | 0.075 mm |
| Akụkụ akụkụ | 16:1 |
| Ụdị nkpuchi solder | LPI |
| SMT Obere.Obosara ihe mkpuchi ihe nkpuchi | 0.075 mm |
| ObereMkpuchi ihe mkpuchi ihe na-ere ihe | 0.05mm |
| Nkwụnye dayameta | 0.25mm - 0.60mm |
| Nnagide Mgbochi Mgbochi | 10% |
| Ngwucha elu | ENIG, Chem.Tin/Sn, Flash Gold |
| Ihe mkpuchi solder | Akwụkwọ ndụ akwụkwọ ndụ / odo / ojii / ọcha / uhie / acha anụnụ anụnụ |
| Ihuenyo silk | Uhie/Edo/oji/Ọcha |
| Asambodo | UL, ISO 9001, ISO14001, IATF16949 |
| Arịrịọ pụrụ iche | Oghere kpuru ìsì, mkpịsị aka ọla edo, BGA, ink carbon, ihe nkpuchi peekable, usoro VIP, Plate Edge, Ọkara oghere |
| Ndị na-eweta ihe | Shengyi, ITEQ, Taiyo, wdg. |
| Ngwungwu nkịtị | Vacuum+Katọn |
Kedu ka ABIS si edozi sekit Flex-Ridid?
Ikike ịkpụzi mgbakọ ikpeazụ nke PCB ndị siri ike na nke na-agbanwe agbanwe iji kwado ihe mkpuchi ngwaahịa bụ uru bụ isi nke bọọdụ sekit na-agbanwe agbanwe.Nke a bụ ndụmọdụ 2 iji tinye n'ọrụ imewe gị siri ike:
Mụbaa ntụkwasị obi nchọta: Mgbachi nke sekit ndị na-efegharị efegharị na-edi pụtara na ọla kọpa na-enwekarị ike ịgbasa karịa na bọọdụ siri ike.Mgbakwunye ọla kọpa na mkpụrụ dị obere karịa na PCB FR4.
Mee ka trace na vias dị ike: Ọ bụrụ na ejighị ya chịkwaa, ịgbada mkpụrụ nwere ike ibute delamination na ọdịda ngwaahịa.Otú ọ dị, enwere ike ịgbasi ike traces na vias iji gbochie delamination, na-emepụtakwa mkpụrụ ka mma n'ichepụta site n'inyekwu ntachi obi.
Uru gbasara ABIS
- Akụrụngwa dị elu-igwe na-ebu na ebe dị elu nke nwere ike ịhazi ihe dịka 25,000 SMD kwa elekere.
- Ike ọkọnọ dị elu nke ọma 60K Sqm kwa ọnwa-Na-enye obere olu na mmepụta PCB na-achọ, yana mmepụta buru ibu.
- Ndị otu injinia ọkachamara-40 injinia na ụlọ akụrụngwa nke ha, siri ike na OEM.Na-enye nhọrọ abụọ dị mfe: Omenala na Ọkọlọtọ-Ọmụma omimi nke IPC Class II na III Standards
Anyị na-enye ndị ahịa chọrọ ka anyị kpọkọta PCB n'ime PCBA, gụnyere ihe atụ, ọrụ NPI, yana mpịakọta obere na ọkara.Anyị nwekwara ike iwepụta akụrụngwa niile maka ọrụ mgbakọ PCB gị.Ndị injinia anyị na ndị otu na-egwupụta ihe nwere ahụmịhe bara ụba na agbụ ọkọnọ na ụlọ ọrụ EMS, nwere ihe ọmụma miri emi na mgbakọ SMT na-enye anyị ohere idozi nsogbu nrụpụta niile.Ọrụ anyị na-efu ọnụ, na-agbanwe agbanwe, yana ntụkwasị obi.Anyị nwere afọ ojuju ndị ahịa n'ofe ọtụtụ ụlọ ọrụ gụnyere ọgwụ, ụlọ ọrụ mmepụta ihe, ụgbọ ala, na ngwa eletrọnịkị ndị ahịa.
Oge ndu PCB na-agbanwe agbanwe
| Obere ogbeOlu ≤1 square mita | Ụbọchị ọrụ | Mmepụta Mass | Ụbọchị ọrụ |
| Otu akụkụ | 3-4 | Otu akụkụ | 8-10 |
| 2-4 n'ígwé | 4-5 | 2-4 n'ígwé | 10-12 |
| 6-8 n'ígwé | 10-12 | 6-8 n'ígwé | 14-18 |
Ọrụ ịdịmma ABIS
-Elu akụrụngwa ndepụta
| Nnwale AOI | Nyochaa maka tapawaChecks maka akụrụngwa gbadara ruo 0201Checks maka ihe ndị na-efu efu, dechapụ, akụkụ ezighi ezi, polarity |
| Nyocha X-ray | X-Ray na-enye nleba anya dị elu nke: BGAs/Micro BGAs/Chip scale packages/Bareboards |
| Nnwale n'ime okirikiri | A na-ejikarị Nnwale In-Circuit eme ihe yana njikọ AOI na-ebelata ntụpọ arụ ọrụ nke nsogbu akụrụngwa kpatara. |
| Nnwale mgbake | Nnwale ọrụ dị elu Mmemme Ngwaọrụ Flash Nnwale arụ ọrụ |
- Nyocha mbata IOC
- Nyocha SPI solder mado
- Nyocha AOI n'ịntanetị
- Nyocha akụkọ mbụ SMT
- Ntụle mpụga
- Nyocha ịgbado ọkụ X-RAY
- Ngwaọrụ BGA rụgharịa ọrụ
- Nyocha QA
- Ụlọ nkwakọba ihe mgbochi static na mbupu
- Kwagide 0% mkpesa na ịdịmma
- Ngalaba niile na-arụ ọrụ dị ka ISO si kwuo, ụlọ ọrụ metụtara ya ga-enye akụkọ 8D ma ọ bụrụ na bọọdụ ọ bụla mebiri emebi.
- Bọdụ niile na-apụ apụ ga-abụrịrị 100% eletrọnịkị nwalere, nwale impedance na ire ere.
- A na-enyocha anya, anyị na-eme nyocha microsection tupu ebupu ya.
- Zụlite echiche nke ndị ọrụ na omenala ụlọ ọrụ anyị, mee ka ha nwee obi ụtọ na ọrụ ha na ụlọ ọrụ anyị, ọ na-enyere ha aka ịmepụta ngwaahịa dị mma.
- Ngwa akụrụngwa dị elu (Shengyi FR4, ITEQ, Taiyo Solder Mask ink wdg)
- The AOI nwere ike inyocha dum set, mbadamba na-enyocha mgbe ọ bụla usoro
Asambodo
FAQ
N'ozuzu, 2-3 ụbọchị maka samples ime.Oge ndu nke mmepụta oke ga-adabere n'ọtụtụ usoro na oge ị na-etinye iwu.
Mba, anyị enweghị ike ịnakwere faịlụ foto, ọ bụrụ na ịnweghị faịlụ gerber, ị nwere ike iziga anyị nlele ka anyị detuo ya.
Usoro nṅomi PCB&PCBA:
Usoro anyị na-emesi ike dị ka n'okpuru:
a), Nlele anya
b), nyocha na-efe efe, ngwa nrụnye
c), njikwa mgbochi
d), Nchọpụta ike onye na-ere ere
e), Mikroskopu dijitalụ metallogram
f), AOI (Nleba anya na-akpaghị aka)
N'ozuzu, 2-3 ụbọchị maka ime sample.Oge ndu nke mmepụta oke ga-adabere n'ọtụtụ usoro na oge ị na-etinye iwu.
Usoro anyị na-emesi ike dị ka n'okpuru:
a), Nlele anya
b), nyocha na-efe efe, ngwa nrụnye
c), njikwa mgbochi
d), Nchọpụta ike onye na-ere ere
e), Mikroskopu dijitalụ metallogram
f), AOI (Nleba anya na-akpaghị aka)
ISO9001, ISO14001, UL USA & USA Canada, IFA16949, SGS, RoHS akụkọ.
Isi ụlọ ọrụ ABIS: njikwa ụlọ ọrụ, nkwukọrịta, ngwaahịa ụgbọ ala na ahụike.Ahịa isi nke ABIS: 90% Market International (40% -50% maka USA, 35% maka Europe, 5% maka Russia na 5% -10% maka East Asia) na 10% Ahịa ụlọ.
Biko zitere anyị ajụjụ nkọwa nkọwa, dị ka Nọmba ihe, Ọnụọgụ maka ihe ọ bụla, arịrịọ dị mma, Logo, Usoro ịkwụ ụgwọ, usoro njem, ebe mgbapu, wdg. Anyị ga-emere gị nkọwa ziri ezi ozugbo enwere ike.
Ọnụego nnyefe n'oge karịrị 95%
a), ntụgharị ọsọ ọsọ awa 24 maka PCB akụkụ abụọ
b), 48hours maka 4-8 oyi akwa prototype PCB
c), 1 awa maka nhota
d), awa 2 maka ajụjụ injinia/nzaghachi mkpesa
e), 7-24 awa maka nkwado teknụzụ / ịtụ ọrụ / nrụpụta ọrụ
