Nnweta netwọkụ njikwa PCB Board Controller PCBA Board maka ụlọ ọrụ nkwukọrịta
Ozi nrụpụta
| Nlereanya Mba. | PCB-A44 |
| Usoro mgbakọ | SMT |
| Ngwungwu njem | Nkwakọ ngwaahịa mgbochi static |
| Asambodo | UL, ISO9001&14001, SGS, RoHS, Ts16949 |
| Nkọwa | IPC Klas2 |
| Oghere/ Ahịrị kacha nta | 0.075mm / 3mil |
| Ngwa | Nzikọrịta ozi |
| Mmalite | Emebere na china |
| Ike mmepụta | 720,000 M2/Afọ |
Nkọwa ngwaahịa
Okwu Mmalite PCBA
Ụlọ ọrụ ABIS CIRCUITS na-ebuga ọrụ, ọ bụghị naanị ngwaahịa.Anyị na-enye ihe ngwọta, ọ bụghị naanị ngwongwo.
Site na mmepụta PCB, ihe ndị na-azụrụ ihe na ihe ndị ahụ na-agbakọta.Ọ gụnyere:
- Omenala PCB
- PCB osise / imewe dị ka schematic eserese gị
- PCB nrụpụta
- Ịnweta akụrụngwa
- PCB Mgbakọta
- PCBA 100% ule
Uru Anyị
- Igwe eji euipment dị elu dị elu nke nwere ike hazie ihe dịka 25,000 SMD kwa elekere.
- Ike ọkọnọ dị elu nke ọma 60K Sqm kwa ọnwa-Na-enye obere olu na mmepụta PCB na-achọ, na-arụpụta nnukwu ihe.
- Ndị otu injinia ọkachamara-40 injinia na ụlọ akụrụngwa nke ha, siri ike na OEM.Na-enye nhọrọ abụọ dị mfe: Omenala na Ọkọlọtọ-Ọmụma omimi nke IPC Class II na III Standards
Anyị na-enye ndị ahịa chọrọ ka anyị kpọkọta PCB n'ime PCBA, gụnyere ihe atụ, ọrụ NPI, obere na ọkara olu.Anyị nwekwara ike iwepụta akụrụngwa niile maka ọrụ mgbakọ PCB gị.Ndị injinia anyị na ndị otu na-egwupụta ihe nwere ahụmịhe bara ụba na agbụ ọkọnọ na ụlọ ọrụ EMS, nwere ihe ọmụma miri emi na mgbakọ SMT na-enye ohere iji dozie nsogbu mmepụta niile.Ọrụ anyị na-efu ọnụ, na-agbanwe agbanwe, yana ntụkwasị obi.Anyị nwere afọ ojuju ndị ahịa n'ofe ọtụtụ ụlọ ọrụ gụnyere ahụike, ụlọ ọrụ mmepụta ihe, ụgbọ ala na ngwa eletrọnịkị ndị ahịa.
Ike PCBA
| 1 | Mgbakọ SMT gụnyere mgbakọ BGA |
| 2 | ibe SMD anabatara: 0204, BGA, QFP, QFN, TSOP |
| 3 | Akụkụ akụkụ: 0.2-25mm |
| 4 | Nkwakọ ngwaahịa: 0204 |
| 5 | Obere anya n'etiti BGA: 0.25-2.0mm |
| 6 | Nha BGA: 0.1-0.63mm |
| 7 | Oghere QFP nkeji: 0.35mm |
| 8 | Nha mgbakọ mini: (X*Y): 50*30mm |
| 9 | Nha mgbakọ kacha elu: (X*Y): 350*550mm |
| 10 | Nhọrọ-nkenke ziri ezi: ±0.01mm |
| 11 | Ike ntinye: 0805, 0603, 0402 |
| 12 | Ọgụgụ ntụtụ dị elu dabara adaba dị |
| 13 | Ike SMT kwa ụbọchị: 80,000 isi |
Ike - SMT
| Ahịrị | 9 (5 Yamaha, 4KME) |
| Ike | 52 nde ntinye kwa ọnwa |
| Oke bọọdụ kacha | 457*356mm.(18"X14") |
| Nha akụkụ akụkụ | 0201-54 sq.mm (0.084 sq.inch), ogologo njikọ, CSP, BGA, QFP |
| Ọsọ | 0.15 sk/chip,0.7 sk/QFP |
Ike - PTH
| Ahịrị | 2 |
| Ogologo bọọdụ kacha | 400 mm |
| Ụdị | Ifufe abụọ |
| Ọkwa Pbs | Nkwado ahịrị na-enweghị ndu |
| Oke okpomọkụ | 399 Celsius C |
| fesa flux | mgbakwunye |
| Tupu ọkụ | 3 |
Njikwa ogo
| Nnwale AOI | Na-enyocha maka pasteChecks solder maka akụrụngwa gbadara ruo 0201 Nyochaa ihe ndị na-efu efu, nkwụsị, akụkụ na-ezighi ezi, polarity |
| Nyocha X-ray | X-Ray na-enye nleba anya dị elu nke: BGAs/Micro BGAs/Chip scale packages/Bareboards |
| Nnwale n'ime okirikiri | A na-ejikarị Nnwale In-Circuit eme ihe yana njikọ AOI na-ebelata ntụpọ arụ ọrụ nke nsogbu akụrụngwa kpatara. |
| Nnwale mgbake | Mmemme Ngwaọrụ TestFlash arụrụ dị elu Nnwale arụ ọrụ |
- Nyocha mbata IOC
- Nyocha SPI solder mado
- Nyocha AOI n'ịntanetị
- Nyocha akụkọ mbụ SMT
- Ntụle mpụga
- Nyocha ịgbado ọkụ X-RAY
- Ngwaọrụ BGA rụgharịa ọrụ
- Nyocha QA
- Ụlọ nkwakọba ihe mgbochi static na mbupu
Asambodo
FAQ
Mba, anyị enweghị ike ịnakwere faịlụ foto, ọ bụrụ na ịnweghị faịlụ gerber, ị nwere ike iziga anyị nlele ka anyị detuo ya.
Usoro nṅomi PCB&PCBA:
Ọnụego nnyefe n'oge karịrị 95%
a), ntụgharị ọsọ ọsọ awa 24 maka PCB akụkụ abụọ
b),48hours maka 4-8 n'ígwé ụdị PCB
c),1 hour maka nhota
d), awa 2 maka ajụjụ injinia/nzaghachi mkpesa
e),7-24 awa maka ọrụ nkwado teknụzụ / ịtụ ọrụ / nrụpụta ọrụ
PCB bụ bọọdụ nwere egwu ọla kọpa na mpe mpe akwa na-ejikọ akụrụngwa eletrọnịkị.PCBA na-ezo aka na mgbakọ nke akụrụngwa na PCB iji mepụta ngwaọrụ eletrọnịkị na-arụ ọrụ.
SA na-eji tapawa ochie na-ejide ngwa eletrọnịkị n'ọnọdụ nwa oge tupu etinyere ya na PCB kpamkpam n'oge usoro ire ere.
| Ike mmepụta nke ngwaahịa ire ere ọkụ | |
| Ụlọ ọrụ PCB akụkụ/Multlayer ugboro abụọ | Ụlọ ọrụ aluminom PCB |
| Ike nka nka | Ike nka nka |
| Akụrụngwa: CEM-1, CEM-3, FR-4 (High TG), Rogers, TELFON | Raw ihe: Aluminom base, ọla kọpa |
| oyi akwa: 1 oyi akwa ruo 20 oyi akwa | oyi akwa: 1 oyi akwa na 2 Layer |
| Obosara Obere ahịrị/Oghere: 3mil/3mil (0.075mm/0.075mm) | Obosara / oghere: 4mil/4mil (0.1mm/0.1mm) |
| Nha oghere Min.: 0.1mm (oghere dirilling) | Min.Oghere oghere: 12mil (0.3mm) |
| Oke.Oke osisi: 1200mm* 600mm | Oke osisi: 1200mm* 560mm(47in* 22in) |
| Ọkpụrụkpụ osisi emechara: 0.2mm- 6.0mm | Ọkpụkpụ osisi emechara: 0.3 ~ 5mm |
| Ọkpụrụkpụ ọla kọpa: 18um ~ 280um (0.5oz ~ 8oz) | Ọkpụrụkpụ ọla kọpa: 35um ~ 210um (1oz ~ 6oz) |
| Nkwadebe NPTH: +/- 0.075mm, PTH oghere ndidi: +/- 0.05mm | Ntachi obi oghere: +/- 0.05mm |
| Nlegide ihe ngosi: +/- 0.13mm | Nlegide ihe nlegharị anya: +/ 0.15mm;nnabata akara ntụmadị:+/ 0.1mm |
| Emechara elu elu: HASL na-enweghị ndu, ọla edo imikpu (ENIG), ọla ọcha imikpu, OSP, plating gold, mkpịsị aka ọla edo, Carbon INK. | Emechara elu elu: HASL n'efu, ọla edo imikpu (ENIG), ọlaọcha imikpu, OSP wdg |
| Nkwekọrịta njikwa mgbochi: +/- 10% | Nlegide ọkpụrụkpụ nke fọdụrụ: +/- 0.1mm |
| Ike mmepụta: 50,000 sqm / ọnwa | MC PCB mmepụta ike: 10,000 sqm / ọnwa |
Usoro nkwado anyị dị ka n'okpuru:
a), Nlele anya
b), Nchọpụta na-efe efe, ngwa nrụnye
c), njikwa mgbochi
d), Nchọpụta ike onye na-ere ere
e), Mikroskopu metallogram dijitalụ
f),AOI(Nyocha anya akpaaka)
Ụgwọ nke ihe (BOM) na-akọwa:
a),Mnọmba akụkụ nke anufacturers,
b),CNọmba akụkụ nke ndị na-ebubata ihe (dịka ọmụmaatụ Digi-key, Mouser, RS)
c), foto nlele PCBA ma ọ bụrụ na ọ ga-ekwe omume.
d), Ọnụọgụ
ABIS enweghị MOQ chọrọ maka PCB ma ọ bụ PCBA.
| Ike mmepụta nke ngwaahịa ire ere ọkụ | |
| Ụlọ ọrụ PCB akụkụ/Multlayer ugboro abụọ | Ụlọ ọrụ aluminom PCB |
| Ike nka nka | Ike nka nka |
| Akụrụngwa: CEM-1, CEM-3, FR-4 (High TG), Rogers, TELFON | Raw ihe: Aluminom base, ọla kọpa |
| oyi akwa: 1 oyi akwa ruo 20 oyi akwa | oyi akwa: 1 oyi akwa na 2 Layer |
| Obosara Obere ahịrị/Oghere: 3mil/3mil (0.075mm/0.075mm) | Obosara / oghere: 4mil/4mil (0.1mm/0.1mm) |
| Nha oghere Min.: 0.1mm (oghere dirilling) | Min.Oghere oghere: 12mil (0.3mm) |
| Oke.Oke osisi: 1200mm* 600mm | Oke osisi: 1200mm* 560mm(47in* 22in) |
| Ọkpụrụkpụ osisi emechara: 0.2mm- 6.0mm | Ọkpụkpụ osisi emechara: 0.3 ~ 5mm |
| Ọkpụrụkpụ ọla kọpa: 18um ~ 280um (0.5oz ~ 8oz) | Ọkpụrụkpụ ọla kọpa: 35um ~ 210um (1oz ~ 6oz) |
| Nkwadebe NPTH: +/- 0.075mm, PTH oghere ndidi: +/- 0.05mm | Ntachi obi oghere: +/- 0.05mm |
| Nlegide ihe ngosi: +/- 0.13mm | Nlegide ihe nlegharị anya: +/ 0.15mm;nnabata akara ntụmadị:+/ 0.1mm |
| Emechara elu elu: HASL na-enweghị ndu, ọla edo imikpu (ENIG), ọla ọcha imikpu, OSP, plating gold, mkpịsị aka ọla edo, Carbon INK. | Emechara elu elu: HASL n'efu, ọla edo imikpu (ENIG), ọlaọcha imikpu, OSP wdg |
| Nkwekọrịta njikwa mgbochi: +/- 10% | Nlegide ọkpụrụkpụ nke fọdụrụ: +/- 0.1mm |
| Ike mmepụta: 50,000 sqm / ọnwa | MC PCB mmepụta ike: 10,000 sqm / ọnwa |
Site na ABIS, ndị ahịa na-ebelata nke ọma ma na-ebelata ọnụ ahịa ịzụ ahịa zuru ụwa ọnụ.N'azụ ọrụ ọ bụla ABIS na-enye, zoro ezo na-echekwa ọnụ ahịa maka ndị ahịa.
.Anyị nwere ụlọ ahịa abụọ ọnụ, otu bụ maka prototype, ntụgharị ngwa ngwa, na ime obere olu.Nke ọzọ bụ maka mmepụta oke maka bọọdụ HDI, yana ndị ọrụ ọkachamara nwere oke ọrụ, maka ngwaahịa dị elu nwere ọnụ ahịa asọmpi yana nnyefe oge.
.Anyị na-enye ezigbo ahịa ọkachamara, nkwado teknụzụ na ngwa agha, na ndabere zuru ụwa ọnụ yana nzaghachi mkpesa 24 awa.
