2 Layer Aluminom Circuit Board nwere ENIG Surface finishing maka ọkụ

Nkọwa dị mkpirikpi:


  • Ụdị NO.:PCB-A2
  • oyi akwa: 2L
  • Akụkụ:150 * 150mm
  • Ihe ndabere:Aluminom
  • Ọkpụrụkpụ bọọdụ:1.6mm
  • Ọfụfụ dị n'elu:ENIG 2U''(min)
  • Ọkpụrụkpụ ọla kọpa:1.0oz
  • Agba nkpuchi solder:Ọcha
  • Agba akụkọ mgbe ochie:Nwa
  • Nkà na ụzụ pụrụ iche:IPC Klas2
  • Nkọwa ngwaahịa

    Mkpado ngwaahịa

    Ozi nrụpụta

    Nọmba nlereanya: PCB-A2
    Ngwungwu njem Mbukota Vacuum
    Asambodo UL, ISO9001&ISO14001, RoHS
    Nkọwa IPC Klas2
    Oghere/ Ahịrị kacha nta 0.075mm / 3mil
    Ike mmepụta: 10,000 sqm / kwa ọnwa
    Koodu HS 8534009000
    Mmalite: Emebere na china

    Nkọwa ngwaahịa

    Nka na ụzụ & Ike
    1.0W 2.0W 3.0W Aluminom PCB MCPCB LED Circuit Board na UL, SGS, ISO

    Otu, akụkụ abụọ & PCB multi-layer.

    Vias e liri/Onye kpuru ìsì, Site na pad, Counter Sink Hole, Screw Hole(counterbore), Press-fit, Half Hole.

    HASL enweghị ụzọ, ọla edo / ọla ọcha / tin, OSP, plating gold / mkpịsị aka, nkpuchi peelable,

    bọọdụ sekit ebi ebi na-agbaso ụkpụrụ IPC klaasị 2 & 3 mba ụwa PCB.

    Ọnụọgụ dị site na prototype ruo na mmepụta ogbe buru ibu.

    100% E-Nnwale.

    Nkeji 5-6

    Ihe

    Speci.

    N'ígwé

    1 ~ 2

    Ọkpụrụkpụ bọọdụ mmecha nkịtị

    0.3-5 mm

    Ihe onwunwe

    Aluminom Base, ọla kọpa

    Oke panel nke kachasị

    1200mm*560mm(47in*22in)

    Nha oghere min

    12mil (0.3mm)

    Ogologo Ahịrị Obere/Oghere

    3mil (0.075mm)

    Ọkpụrụkpụ ọla kọpa

    35μm-210μm (1oz-6oz)

    Ọkpụrụkpụ ọla kọpa nkịtị

    18μm, 35μm, 70μm, 105μm.

    Nọgidere ịdị arọ nke ịdị arọ

    +/- 0.1mm

    Nlegide ihe ndezigharị ụzọ

    +/- 0.15mm

    Nlegide ihe ngosi Punching

    +/- 0.1mm

    Ụdị nkpuchi solder

    LPI(foto mmiri mmiri)

    ObereMkpuchi ihe mkpuchi ihe na-ere ihe

    0.05mm

    Nkwụnye dayameta

    0.25mm - 0.60mm

    Nnagide Mgbochi Mgbochi

    +/- 10%

    Ngwucha elu

    HaSL n'efu, ọla edo imikpu (ENIG), sliver immersion, OSP, wdg

    Ihe mkpuchi solder

    Omenala

    Ihuenyo silk

    Omenala

    Ike mmepụta MC PCB

    10,000 sqm / kwa ọnwa

    Oge ndu Q/T

    Dị ka isi ihe ugbu a, anyị na-emekarị otu aluminom PCB, ebe ọ na-esiri ike ime PCB aluminom nwere akụkụ abụọ.

    Obere ogbe olu

    ≤1 square mita

    Ụbọchị ọrụ

    Mmepụta Mass

    : 1 square mita

    Ụbọchị ọrụ

    Otu akụkụ

    3-4 ụbọchị

    Otu akụkụ

    2-4 izu

    Akụkụ abụọ

    6-7 ụbọchị

    Akụkụ abụọ

    2.5-5 izu

    Njikwa ogo

    Ndepụta akụrụngwa dị elu

    Nnwale AOI Nyochaa maka tapawa solder

    Na-enyocha ihe mejupụtara ruo 0201

    Nyochaa ihe ndị na-efu efu, nkwụsị, akụkụ na-ezighi ezi, polarity

    Nyocha X-ray X-Ray na-enye nleba anya dị elu nke:

    BGAs/Micro BGAs/Chip scale packages/Bare mbadamba

    Nnwale n'ime okirikiri A na-ejikarị Nnwale In-Circuit eme ihe yana njikọ AOI na-ebelata ntụpọ arụ ọrụ nke nsogbu akụrụngwa kpatara.
    Nnwale mgbake Nnwale ọrụ dị elu

    Mmemme Ngwaọrụ Flash

    Nnwale arụ ọrụ

    Nyocha mbata IOC

    Nyocha SPI solder mado

    Nyocha AOI n'ịntanetị

    Nyocha akụkọ mbụ SMT

    Ntụle mpụga

    Nyocha ịgbado ọkụ X-RAY

    Ngwaọrụ BGA rụgharịa ọrụ

    Nyocha QA

    Ụlọ nkwakọba ihe mgbochi static na mbupu

    Na-agbaso mkpesa 0% maka ịdịmma

    Ngalaba niile na-arụ ọrụ dị ka ISO si kwuo, ụlọ ọrụ metụtara ya ga-enye akụkọ 8D ma ọ bụrụ na bọọdụ ọ bụla mebiri emebi.

    Bọdụ niile na-apụ apụ ga-abụrịrị 100% eletrọnịkị nwalere, nwale impedance na ire ere.

    A na-enyocha anya, anyị na-eme nyocha microsection tupu ebupu ya.

    Zụlite echiche nke ndị ọrụ na omenala ụlọ ọrụ anyị, mee ka ha nwee obi ụtọ na ọrụ ha na ụlọ ọrụ anyị, ọ na-enyere ha aka ịmepụta ngwaahịa dị mma.

    Ngwa akụrụngwa dị elu (Shengyi FR4, ITEQ, Taiyo Solder Mask ink wdg)

    The AOI nwere ike inyocha dum set, mbadamba na-enyocha mgbe ọ bụla usoro

    China Multilayer PCB Board 6layers ENIG Printed Circult Board na Vias jupụtara na klas IPC 3-22
    Ụlọ ọrụ ogo

    Kedu ka ABIS si arụ ọrụ n'ichepụta ihe isi ike nke Aluminom PCB?

    A na-achịkwa ngwa ngwa ngwa ngwa: Ọnụego ngafe nke ihe na-abata karịa 99.9%.Ọnụọgụ nke ọjụjụ ọnụ ọgụgụ dị n'okpuru 0.01%.

    Achịkwala ọla kọpa: foil ọla kọpa ejiri na PCB Aluminom na-arị elu karịa.Ọ bụrụ na foil ọla kọpa karịrị 3oz agbanyeghị, etching ahụ chọrọ nkwụghachi obosara.Site na ngwa nkenke dị elu nke sitere na Germany, obosara / oghere min anyị nwere ike ijikwa ruru 0.01mm.A ga-ahazi nkwụghachi ụgwọ obosara nchọta nke ọma ka ịzenarị obosara nchọta site na nnabata mgbe etching gasịrị.

    Mpempe akwụkwọ mkpuchi mkpuchi dị elu: Dị ka anyị niile maara, enwere ihe isi ike na ibipụta ihe mkpuchi nke aluminom PCB n'ihi oke ọla kọpa.Nke a bụ n'ihi na ọ bụrụ na Chọpụta ọla kọpa bụ oke oké, mgbe ahụ image etched ga-enwe nnukwu ọdịiche dị n'etiti Chọpụta elu na isi osisi na solder nkpuchi obibi ga-esi ike.Anyị na-ekwusi ike na ụkpụrụ kachasị elu nke mmanụ nkpuchi solder na usoro dum, site na otu ruo na mbipụta ihe mkpuchi oge abụọ.

    Mechanical Manufacturing: Iji zere mbenata eletriki ike mere site n'ibu n'ichepụta usoro, na-agụnye n'ibu mkpọpu ala, ịkpụzi na v-akara wdg Ya mere, n'ihi na ala-olu n'ichepụta ngwaahịa, anyị na-ebute ụzọ na-eji eletriki igwe na ọkachamara-egwe ọka cutter.Ọzọkwa, anyị na-etinye uche dị ukwuu n'ịgbanwe ihe ndị na-egwupụta ihe na igbochi burr site na ịmepụta.

    Asambodo

    akwụkwọ 2 (1)
    akwụkwọ 2 (2)
    akwụkwọ 2 (4)
    akwụkwọ 2 (3)

    Nkọwapụta nke laminate nke dabeere na aluminum

    Ihe

    Nwalee a
    ọnọdụ

    Nkọwa AL-01-P

    AL-01-A

    Nkọwapụta

    AL-01-L

    Nkọwapụta

    Nkeji

    Nrụpụta okpomọkụ

    A

    0.8±20%

    1.3±20%

    2.0±20%

    3.0±20%

    W/mK

    Nguzogide okpomọkụ   0.85 0.65 0.45 0.3 ℃W
    Nguzogide onye na-ere ere 288d.c 120 120 120 120 Nkeji
    Ike bee
    Ọnọdụ nkịtị

    A Thermal
    post nrụgide

    1.2
    1.2

    1.2
    1.2

    1.2
    1.2

    1.2
    1.2

    N/mm

    Olu resistivity
    Ọnọdụ nkịtị

    C-96/35/90 E-
    24/125

    108
    106

    108
    106

    108
    106

    108
    106

    MΩ.CM

    Mgbochi nke elu
    Ọnọdụ nkịtị

    C-96/35/90 E-
    24/125

    107
    106

    107
    106

    107
    106

    107
    106

    MM

    Dielectric Constant C-96/35/90 4.2 4.9 4.9 4.9 1MH2
    Ihe nchụsa C-96/35/90 ≤0.02 ≤0.02 ≤0.02 ≤0.02 1MH2
    Mmiri Absorption   0.1 0.1 0.1 0.1 %
    Mbelata Volte D-48/50+D-0.5/23 3 3 3 3 KV/DC
    Ike mkpuchi A 30 30 30 30 KV/mm
    Welie Camber A 0.5 0.5 0.5 0.5 %
    Ọkụ ọkụ UL94 V-0 V-0 V-0 V-0  
    CTi IEC60112 600 600 600 600 V
    TG   150 130 130 130

    Ọkpụrụkpụ ngwaahịa

    Ihuenyo actinium dị oke: 1 oz ~ 15 oz, bọọdụ aluminom dị oke:
    0.6 ~ 5.0 mm (oke ndidi ± 0.10mm)

    Nkọwapụta ngwaahịa

    1000×1200 500×1200(mm)

    • Ntinye ngwa ngwa olu ugboro ugboro, ihe nkwuputa mmepụta, capacitor na-akwụ ụgwọ, ụda olu ugboro ugboro, preamplifier, amplifier ike wdg.
    • Akụrụngwa ọkọnọ ike: usoro voltaji ụkpụrụ, mgbanwe modulator, na DC-AC transducer…etc.
    • Ngwa elektrọn nzikọrịta ozi igwe nrịba elu ugboro ugboro, ekwentị fiter, zipu ekwentị telegram.
    • akpaaka ụlọ ọrụ: onye na-ebi akwụkwọ, nnukwu ihe ngosi eletrọnịkị na ebipụta klaasị.
    • Autocar the igniter, ike ọkọnọ modulator na swap mgbanwe igwe, ike ọkọnọ njikwa, na-aghọ naanị usoro wdg.
    • Mgbakọ.bọọdụ CPU, onye ọkwọ ụgbọ ala dị nro, na ngwaọrụ ọkọnọ ike… wdg.
    • Ike ebu uka: mgbanwe na-eru a igwe, siri ike relay, commuter àkwà mmiri wdg.
    • Igwe ọkụ ọkụ, ọkụ na ụgwọ mmiri: nnukwu ọkụ ọkụ ọkụ, mgbidi LED wdg

    Kedu usoro mmepụta gị?

    Usoro mmepụta PCB

    FAQ

    Q1: Gịnị bụ gị mmepụta usoro?

    Usoro mmepụta PCB

    Q2.Kedu mgbe a ga-enyocha faịlụ PCB m?

    Achọpụtara ya n'ime awa iri na abụọ.Ozugbo a nyochara ajụjụ Injinia na faịlụ na-arụ ọrụ, anyị ga-amalite mmepụta ahụ.

    Q3: Ụbọchị ole ka a ga-emecha ihe nlele ahụ?Kedu maka mmepụta oke?

    N'ozuzu, 2-3 ụbọchị maka ime sample.Oge ndu nke mmepụta oke ga-adabere n'ọtụtụ usoro na oge ị na-etinye iwu.

    Q4: Kedu asambodo ị nwere?

    ISO9001, ISO14001, UL USA & USA Canada, IFA16949, SGS, RoHS akụkọ.

    Q5: Faịlụ PCB m ọ dị mma mgbe m nyefere gị ha maka nrụpụta?

    Anyị na-akwanyere ikike nwebisiinka ndị ahịa ùgwù na anyị agaghị arụpụta PCB maka ụfọdụotueles na faịlụ gị ma ọ bụrụ na anyị enwetaghị ikike ederede n'aka gị, ma ọ bụ anyị agaghị ekekọrịta faịlụ ahụ na ndị ọzọ nke atọ ọzọ.

    Q6: Kedu otu esi anwale ma chịkwaa àgwà?

    Usoro anyị na-emesi ike dị ka n'okpuru:

    a), Nlele anya

    b), nyocha na-efe efe, ngwa nrụnye

    c), njikwa mgbochi

    d), Nchọpụta ike onye na-ere ere

    e), Mikroskopu dijitalụ metallogram

    f), AOI (Nleba anya na-akpaghị aka)

    Q7: Enwere m ike ịnweta sample iji nwalee?

    Ee, anyị na-enwe obi ụtọ na-ebunye modul samples iji nwalee na-elele àgwà, agwakọta sample iji dị.Biko mara na onye zụrụ ahịa kwesịrị ịkwụ ụgwọ maka mbupu.

    Q8: Ọ bụrụ na m na-enye nnukwu ego, kedu ihe dị mma?

    Biko zitere anyị ajụjụ nkọwa nkọwa, dị ka Nọmba ihe, Ọnụọgụ maka ihe ọ bụla, arịrịọ dị mma, Logo, Usoro ịkwụ ụgwọ, usoro njem, ebe mgbapu, wdg. Anyị ga-emere gị nkọwa ziri ezi ozugbo enwere ike.

    Q9: Kedu maka ụgwọ mbupu?

    Anyị na-enye ibu dị ka ntọala iwu site na ụlọ ọrụ awara awara, enweghị ụgwọ ọzọ.

    Q10: Kedu maka ọrụ ntụgharị ngwa ngwa gị?

    Ọnụego nnyefe n'oge karịrị 95%

    a), ntụgharị ọsọ ọsọ awa 24 maka PCB akụkụ abụọ

    b), 48hours maka 4-8 oyi akwa prototype PCB

    c), 1 awa maka nhota

    d), awa 2 maka ajụjụ injinia/nzaghachi mkpesa

    e), 7-24 awa maka nkwado teknụzụ / ịtụ ọrụ / nrụpụta ọrụ


  • Nke gara aga:
  • Osote:

  • Dee ozi gị ebe a ziga anyị ya